2014 Gmc Acadia Slt-1 on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GM forced to cut truck production amid semiconductor shortage

WASHINGTON — General Motors said Wednesday it will cut some truck production in North America because of the ongoing global semiconductor shortage. The largest U.S. automaker said its Flint Assembly plant that builds the Chevrolet Silverado HD and GMC Sierra HD trucks will operate on one production shift the week of July 26. GM said its Ft. Wayne Assembly plant in Indiana that builds the Chevrolet Silverado 1500 and GMC Sierra 1500 model trucks will be idled next week. GM's Silao Assembly plant in Mexico that also builds the Chevrolet Silverado 1500, Cheyenne (for the Mexico market) and GMC Sierra 1500 will also suspend production next week. All three plants are expected to resume regular production the week of August 2. Related video:

2022 GMC Sierra Super Cruise First Drive | Now with trailering and automatic lane-changing

Although the updated late-model year 2022 GMC Sierra is still a little ways off (In fact, it hasn't even been revealed), we've had an opportunity to try one of its headlining features: Super Cruise. But it's not quite the Super Cruise you know from the current Cadillac line. The new Sierra will be getting a newer version with two features: the ability to execute lane changes and passes automatically, and the ability to operate with a trailer. We tried the system at GM's proving grounds in Milford, Mich., and our test vehicles were 2022 Sierra prototypes. Though the trucks themselves are early examples with features not finalized, GMC representatives said the Super Cruise system is pretty much finished. The system uses close and long-range radar sensors at the front and a new set of radar sensors at the back, plus the truck's various cameras. It also utilizes the mapping data that GM has accumulated for the system to ensure it operates on approved roads and has detailed information about where the car is. Now, the first new feature enabled by the updated Super Cruise is the automatic lane-change system. The current system can change lanes on its own, but it must be prompted by a press of the turn signal. That feature remains intact, but now, if you approach a slower vehicle on a multi-lane highway, Super Cruise can check the lane next to you to see if it's safe to merge, change lanes, and then return to the original lane once the slow-moving vehicle has been passed. This is where those rear radar sensors come in. We tried it three times on GM's big banked oval course, and it did it impressively smoothly. It was able to make the decision proactively, too, making the decision to change a good distance before we were on top of the slow moving car. Oh, and of course, because this is Super Cruise, it all happened without us having to touch the wheel. Our automatic lane change test was followed by trying Super Cruise with a trailer. Now, it's important to note that the automatic lane-changing functionality won't work with a trailer. This is because that function depends on a set of radar systems at the back of the truck that are blocked by a trailer. Apart from that, the rest of Super Cruise's functions still work just fine. To make this possible (and safe), the system is able to estimate the weight of the trailer and adjust following distance accordingly, allowing it to safely slow down as needed.