2014 Gmc Acadia Sle-2 on 2040-cars

Auto blog

2022 GMC Hummer EV dimensions, clearances and off-road features explained

There are two things that almost everyone immediately thinks of when they hear the word "Hummer." And they are size and off-road capability. Looking at the numbers on the 2022 GMC Hummer EV, it seems the electric pickup has literal truck loads of each. One of the most prodigious numbers is the truck's width. See those clearance marker lights on the roof? They aren't just there for style, they're required by law due its width. At 86.7 inches, it's just a bit wider than a Ford F-150 Raptor, which is itself 6.4 inches wider than a comparable F-150. The Hummer is also 5.5 inches wider than a GMC Sierra. Length is more reasonable at 216.8 inches, which is much less than a full-size crew cab pickup (a Sierra 1500 is 231.7 inches with its 5-foot-8-inch box or 241.2 with the 6-foot-6 one). It's even 3 inches less than the Raptor SuperCab and only 4.4 inches longer than a GMC Canyon with the standard 5-foot-2-inch box. In other words, the Hummer EV is roughly as long as a midsize pickup but is wider than a heavy-duty one.  What does that mean for the cabin? With 38.9 inches of rear legroom, it falls well short of a Sierra Crew Cab's 43.4, but it's important to remember that crew cab pickups have an overkill amount of limo-like legroom. The Hummer's amount is still 3.7 inches longer than a Sierra Double Cab and 3.1 inches longer than a Canyon Crew Cab. Headroom, which was rather pathetic in the old Hummer H2, is 38.6 inches in the back seat – less than both its GMC truck siblings, but not by much. In other words, there should be plenty of space back there. Note that GMC didn't indicate bed length, frunk volume, or importantly, curb weight. We will update this should we find out answers to any of those.  Although it's big, the Hummer has plenty of features to make it nimble off road, both traditional and high-tech. One of the primary features is the height-adjustable air suspension, which offers 13 inches of travel and automatically adjusts damping for driving conditions. It has three main levels, a lowered setting for Aero Mode that helps with improving highway energy use, a default height for the normal driving modes, and a higher setting for the off-road Terrain Mode.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

May 2016: FCA wins, Ford and GM stumble on weak car volumes

The May 2016 sales numbers are in, and it looks as though FCA is getting some vindication for boldly cancelling two slow-selling car models. Meanwhile, Ford saw overall sales dip and GM's May volume took a big dive versus the same month in 2015. While Marchionne's decision to axe the Chrysler 200 and Dodge Dart has drawn criticism as being short-sighted, it's working for FCA so far. Although the Dart and 200 aren't out of production yet and no capacity has been shifted to crossover or trucks, May's numbers show that the emphasis on Jeep and Ram models makes sense right now. FCA's US sales rose 1 percent last month compared to May 2015, putting the year-to-date total at 955,186 vehicles, an increase of 6 percent compared to the same period last year. Standouts included the Jeep Renegade, Compass, and Patriot, and the Fiat 500X. Ram pickup sales were down 3 percent. And your fun fact is that Alfa Romeo sales were up precisely 10 percent, for a total of 44 4Cs sold versus 40 in the same month last year. At FoMoCo, the Ford brand took a hit to the tune of 6.4 percent from May 2015 to 2016, registering 226,190 sales last month. Lincoln showed improvement on its modest numbers, going from 9,174 to 9,807, a 6.9 percent increase. Overall, Ford was down 5.9 percent for the month to 235,997; despite the slump, year-to-date total Ford sales are up 4.2 percent to 1,112,939. Strong sellers included Escape, Expedition, F-Series, and Transit - big stuff. Most small and/or efficient models (Fiesta, Focus, Fusion, C-Max) saw sales slides. Fusion sales were also down, likely due to effects of model changeover to the freshened 2017 model. Ford has promised four new crossovers and SUVs by 2020 and if things keep trending this way the company will be able to sell them, but things could change in the next four years. GM saw the worst of it for domestic brands. Retail and fleet sales were down for each of the four divisions, with the May 2016 total dropping 18 percent to 240,450 vehicles. GM's year-to-date sales are down 5.0 percent in 2016 to 1,183,705. Both the Sierra and Silverado were down significantly, and the majority of Chevy, Buick, GMC, and Cadillac nameplates saw sales decreases, with both small cars and larger utilities included. Not even big stuff could help GM this month, it seems. We'll have more on the rest of the industry's May sales as those figures trickle in.