2014 Gmc Acadia Denali on 2040-cars

Auto blog

2022 GMC Hummer Edition 1 weighs 9,063 pounds

From the beginning, the Hummer line of vehicles has been synonymous with the phrase, "absolute unit." The M998 Humvee turned to civilian use as the Hummer H1 came with a curb weight of 7,560 pounds depending on configuration. The much more urbane Hummer H2 didn't sacrifice much of those gains, putting about 6,615 on the scales. Let us not forget that the behemoth gravitational pull and square-jawed mass were what every Hummer buyer wanted. So, starting with the brand values and customer demand, and adding the fact that electric vehicles are substantially heavier than their ICE counterparts, no one should be surprised that the 2022 GMC Hummer Edition 1 weighs 9,063 pounds. That's just one of the substantial figures GMC included in a self-certification filing submitted to the U.S. Environmental Protection Agency, the document rooted out by Car and Driver. Last year GMC told us the Hummer would weigh 9,046 pounds, which proves again the Freshman 15 (or 16) is unavoidable.  Loaded up with humans and their accessories, the truck's gross vehicle weight rating (GVWR) comes in at 10,550 pounds. It takes a few other big numbers to keep that kind of tonnage on the go. The Ultium battery weighs 2,923 pounds. With a 617-amp-hour capacity at 400 volts, total capacity comes in at 246.8 kWh, specific energy at 158 Wh/kg. Usable capacity is about 85% less, at 212.7 kWh. For the time being, these numbers put every other pack in a production vehicle in the shade. That gargantuan chemical plant in the Hummer's floor powers a 329-mile range the same way a giant fuel tanks feed a truck that gets 8 miles to the gallon. The miles per gallon equivalent figures GMC submitted to the EPA are 51 MPGe city, 43 MPGe highway, 47 MPGe combined. Motor Trend questioned whether GM applied the correction factor used for window sticker numbers; if not, the standard 0.7 correction drops the MPGe specs to 36 city, 30 highway, and 33 combined. However, trucks with a GVWR beyond 8,500 pounds don't need to display fuel economy figures on their window stickers, so don't expect to see any such details on dealer lots. For comparison, the Rivian R1T Launch Edition weighs about 7,000 pounds, and fits a 128.9 kWh battery good for an estimated 314 miles estimated at 70 MPGe.

GM's fullsize SUVs boost highway mileage by nearly 10 percent

We met the redesigned 2015 versions of the Chevrolet Suburban and Tahoe, and the GMC Yukon and Yukon XL at the 2013 LA Auto Show. Improved gas mileage numbers have been announced to go along with the improved exteriors and interiors, with city mileage improving by seven percent and highway mileage going up by nearly ten percent; you'll now get 16 miles per gallon in the city and 23 on the highway.
The only applies to models with the 5.3-liter engine, though, not the premium Yukon Denali and Yukon XL Denali SUVs with the 6.2-liter motor. Still, the 5.3 gets you more power than previously, with 355 horsepower and 383 pound-feet of torque underfoot, on top of the improved fuel economy numbers. The 6.2-liter sticks with official mpg ratings of 15 highway, 21 city. There's a brief press release below with words straight from the horse's mouth.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.