2012 Gmc Acadia Denali Navigation Heated Cooled Leather Quad Sunroof One Owner on 2040-cars

Auto blog

No carbon fiber was harmed in the making of new 2015 GMC Sierra Carbon Edition

Carbon fiber is known for its properties of combining amazing strength with extremely low weight, and its frequent use in high performance vehicles gives the material a somewhat aggressive air. GMC is hoping to play on some of that mean reputation with its upcoming trio of Sierra Carbon Editions. However, despite their name, there's no actual carbon making its way onto these trucks (at least in the form of CF). Instead, the special edition is a graphics package with some extra equipment thrown in.
All three specials are based on the 2015 Sierra 1500 and can be ordered in two- or four-wheel drive configuration and with the standard 4.3-liter V6 or optional 5.3-liter V8. Things kick off with the standard Sierra Carbon Edition for $33,075, including destination, available only on the double cab body. Buyers get a black grille, carbon fiber decals on the hood and tailgate and body color trim for the door handles and mirror caps. The edition also adds keyless entry, a 110-volt outlet and LED cargo box lighting.
Buyers wanting just a touch more style can opt for the Carbon 20 Edition on the SLE double cab that gets the same exterior tweaks, plus 20-inch aluminum wheels, and retails for $38,275. Finally, there is the Carbon 22 Edition starting at $42,270 on the SLE in double- or crew cab models. It adds further black 22-inch wheels, tubular side steps, fog lights, keyless start, a universal home remote, dual-zone climate control and 110-volt outlet.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GMC shows how the 2022 Hummer could have looked even more futuristic

Excitement filled the room when GMC asked its designers to resurrect the Hummer in April 2019, but a tinge of uneasiness permeated the department after executives locked in an early 2020 unveiling date. Luckily, stylists knew what they wanted early on in the development phase, and preliminary design sketches give us a fascinating look at how they shaped the electric off-roader that ended up making its global debut online in October 2020. Hummer, the brand, unceremoniously shut down in 2010 after General Motors failed to sell it to the Chinese, but its design DNA was so strong that stylists were able to pick up where their predecessors left off. All of the sketches published on Instagram by the official General Motors Design account show a boxy truck with a tall front end, a short windshield, and a generous amount of ground clearance. These styling cues trace their roots to the AM General Humvee that entered production in 1984 and made its combat debut when the United States invaded Panama in 1989. Even the wildest drawings still depict a pickup that's immediately recognizable as a Hummer. Most of the early design sketches wear some variation of the seven-slot grille that characterized Hummer's production models; it's a styling cue that hints at a heritage shared with Jeep under the American Motors Corporation (AMC) umbrella. Oddly, none wear the round headlights seen on the H2, the H3, and the HX concept that nearly became the H4. Was GMC afraid that its Hummer would end up looking too much like a Jeep? And, at least one sketch shows a fold-down windshield, a feature that will not make it to the assembly line. Sketches never reach production without modifications made in the name of packaging and safety concerns, and the Hummer is no exception, but stylists did a good job of reinventing the brand's design language without copying or erasing the past. If the company had stuck around long enough to make a second- and a third-generation H2, odds are it would look a lot like the GMC-branded model that will enter production in a year. GMC remains on track to start 2022 Hummer deliveries in late 2021, though it told Green Car Reports that it still hasn't built a fully functional prototype yet. When it arrives, this outdoorsy pickup will land in a burgeoning segment of the truck market that numerous models (including the Rivian R1T and Ford's electric F-150) will also call home.