2007 Gmc Acadia Slt All Wheel Drive Leather Third Seat 95708 Miles Heated Seats on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Could the GMC Jimmy come back as a Wrangler fighter?

Every three or four years, two cars go into heavy media rotation in stories about supposed new competitors. The headlines go something like, "X automaker working on a vehicle to fight the iconic Y." The Y cars are the Porsche 911 and the Jeep Wrangler. For this story, the X automaker is GM. And since GM already has its 911-fighter poised for debut next month, we speak here of the Wrangler. Car and Driver writes that GMC might take another shot at a Jeep challenger, this time by rebirthing a body-on-frame Jimmy SUV. For any who don't know, GMC sold an S-15 Jimmy from 1982 to 2005, a twin of the Chevrolet S-10 Blazer. Those SUVs started their lives as the Chevrolet S-10 and GMC S-15/Sonoma pickups. The Blazer name has returned to the light, albeit without its old-school rugged manners. There's still an opening on the GMC side, though, so C/D says the idea would be to work that old magic on the GMC Canyon pickup. The report is more chaff than grist for the rumormill, with liberal application of phrases like "looking to come up with," "could be," "could take," and "could arrive." Having said that, a potential Jimmy model could come in a few years, could use the same six-cylinder gas and four-cylinder diesel engines as the Canyon, and could start around $30,000. The Jimmy could wear GMC's new mud-and-guts AT4 trim name, or become a mud-and-guts trim for the Canyon just as the ZR2 is for the Colorado. It's not an entirely crazy idea, however, when a body-on-frame Trailblazer SUV based on the Colorado sells in Latin America, Asia, and Australia and does pretty well in the mud and muck. GM's been on the edge of going to war with the Wrangler for at least 12 years, when a Hummer exec said the HX concept would debut at the 2008 Detroit Auto Show and go on sale in 2010 as the H4. In 2015, The Wall Street Journal said GM was canvassing GMC dealers about something to get in the ring with the Wrangler. And all that was before every other automaker had to watch Jeep open a money-counting operation to handle its Wrangler profits, and dealers started charging $20,000 markups on Gladiators. In May, spy shooters caught a sensor-laden Jeep running at GM's Milford Proving Grounds in Michigan. Earlier this month, Bloomberg reported GM is considering a Hummer revival as an all-electric hardcore SUV. So we will not be surprised if GM rolls out a Wrangler fighter in the near-ish future. But we won't be surprised if GM doesn't, either.

2016 GMC Sierra All Terrain X is cool but no Raptor threat

If you want a brutish off-roader from Ford or Fiat Chrysler Automobiles, you're spoiled for choice. There's the F-150 SVT Raptor, the Jeep Wrangler, and the Ram Rebel and Power Wagon. But since General Motors killed the Hummer brand, it's been without any real competitor to those trucks. The new, special edition GMC Sierra All Terrain X is not going to be that vehicle, but it's close enough to be worth a look. The oft-overlooked Sierra All Terrain's off-road suspension and Eaton locking rear differential give it some real trail credentials. The All Terrain X builds on both with cosmetic and performance upgrades. For most owners, the big draw will be the brawnier 5.3-liter V8. Fitted with a performance exhaust, it should deliver a meatier tone, and according to GMC it bumps output up from 355 to 365 horsepower. The other big performance upgrade comes from the tires, knobby Goodyear Wrangler DuraTrac MT mud-terrain-rated things. The tires and their accompanying 18-inch black aluminum wheels are nice touches. Cool as the All Terrain X might be, it strikes us as an odd strategy for the GMC brand. For one, the trail-ready tires and performance exhaust of the All Terrain X don't seem to fit into the more premium market position that GMC occupies. Moreover, Chevy already has an off-road-oriented pickup in the new Colorado Z71 Trail Boss. Visual upgrades like the black bed-mounted sport bar, LED off-road lights, blacked-out accents, and the 18-inch wheels, the look of the All Terrain X is more in line with the Colorado Trail Boss theme. It's just our two cents, but it seems like attaching the All Terrain X's aesthetic to the Silverado would have been a stronger strategy, and would give Colorado buyers a larger off-road-focused truck to aspire to. You can look for the special edition All Terrain X in GMC dealers this spring, with prices to be announced closer to the on-sale date. Read on for the official press release from GMC. Related Video: GMC Announces Sierra All Terrain X The News GMC today announced the 2016 Sierra All Terrain X – a special edition of the All Terrain model, featuring exclusive premium content that enhances off-road capability and an aggressive, monochromatic appearance. The All Terrain X's powerful attitude reflects a popular personalization trend among off-road enthusiasts, executed with the top-range refinement GMC has cultivated for years with models such as the Sierra Denali.