11 Gmc Acadia Slt on 2040-cars

Auto blog

AWD turbodiesel Equinox, Terrain dropped for 2020

Citing low demand, General Motors is dropping the AWD diesel options off the Chevrolet Equinox and GMC Terrain roster. Chevrolet spokesman Kevin Kelly confirmed to CarsDirect that for 2020, the diesel versions of these SUVs will only be offered with front-wheel-drive. CarsDirect notes that with the AWD diesel Equinox and Terrain gone, the only AWD diesel option in this class is the Mazda CX-5 Skyactiv diesel, which is significantly more expensive: As the AWD diesel CX-5 is only available in a fully loaded Signature specification, the $42,045 price tag is almost $10k heftier than the cheapest comparable Equinox, the AWD 1.6-liter diesel LT which starts from $32,495. The 2019 GMC Terrain AWD SLE costs $34,795 in comparison, which works out to being around $7,200 cheaper than the Mazda. The higher trim levels for the Equinox and Terrain are Premier and SLT, respectively. Some reasoning behind the AWD diesel GM SUV's low uptake is their own price difference to base FWD gasoline models: you can get a 1.5-liter Equinox for less than §25,000 listed. While the 2.2-liter Mazda has plenty more power at 168 hp and 290 lb-ft, compared to 137hp and 240 lb-ft in the 1.6-liter GM SUVs, the Equinox and Terrain are notably more frugal – they are rated 32mpg combined, while the Mazda can manage 28 mpg. With better fuel economy and a significantly lower list price, the General Motors twins are at least more wallet-friendly when it comes to numbers, and as the vehicles will cease to be built in that configuration there's likely to be some cash on the hood on ones in stock. News Source: CarsDirectImage Credit: Chevrolet Chevrolet GM GMC confirmed gmc terrain chevrolet equinox

GMC Hummer EV revealed as a 1,000-hp, 350-mile, fast-charging beast

The 2022 GMC Hummer EV has finally been revealed, and it certainly looks the part. It has chunky, squared-off styling, big tires pushed to the edges, and a towering fascia. But it’s not a case of form over function. On the contrary, the Hummer EV is has some pretty wicked technology and gear under the skin. The first version of the Hummer EV that will be available is the tricked-out Edition 1. It features three electric motors, which allows for torque vectoring. These motors make 1,000 horsepower, though GMC still hasnÂ’t given real-world torque numbers. The motors are fed by a 24-module Ultium battery pack. The pack can provide an estimated 350 miles or more of range. Not only that, but it supports 800-volt fast charging up to 350 kW. ThatÂ’s comparable to PorscheÂ’s charging system, and GMC says it can add an extra 100 miles of range in just 10 minutes. Later, a two-motor Hummer EV and a three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of 2 feet and the capability to climb over an 18-inch vertical obstacle. Owners will be able to easily add more clearance since GMC made the wheel arches large enough to accommodate aftermarket 37-inch tires. Additional off-road goodies include skid plates along the chassis, rock sliders, the previously covered four-wheel steering with Crab Mode diagonal driving, and 18 camera views including angles under the truck for getting over rocks. Those cameras feature sprayers, too to keep them clean. Detailed information on torque output, torque vectoring, tire pressure, vehicle angles and more are also displayed on the infotainment screen. Speaking of that infotainment screen, itÂ’s a massive 13.4 inches and is paired with a 12.3-inch instrument display. They feature proudly in a squared-off, rugged-looking interior. The Hummer EV will get the latest version of Super Cruise, complete with automatic lane-changing. The Edition 1 gets the removable roof panels as standard, and those roof panels are clear, so you can still get some sun with them in place.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.