1963 Ford Thunderbird on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Man has surgery to remove T-Bird turn signal that's been in his arm for 51 years

In 1963, real estate agent Arthur Lampitt was driving a new Ford Thunderbird near East Peoria, Illinois on his way to an appointment when he collided head-on with a truck. A massive accident that was so bad that it was originally reported as a fatal crash, Lampitt suffered a broken hip and that became the focus of doctors' efforts. In fact, no one noticed the fact that the turn-signal stalk had been broken off the steering column and had lodged itself in Lampitt's arm. Fast-forward to around ten years ago, when Lampitt set off a courthouse metal detector because of a "slender object, about the size of a pencil" in his arm. Despite that unnerving discovery, the doctor who examined Lampitt said that since it didn't hurt, he needn't worry about it. This year, however, it did start hurting and the affected arm started to bulge. Lampitt decided to have the issue seen to, and suspected it might have something to do with his 1963 accident. When he looked through photos of the wreck taken by a friend, he noticed the turn-signal stalk of the Thunderbird missing and figured that was the culprit. After a 45-minute outpatient surgery, the surgeon verified it: a slim, slightly bent and corroded, seven-inch metal cylinder with a trumpeted end. The surgeon said a protective pocket had formed around it, which is why it could remain in Lampitt's arm so long, but it was still unusual - "We see all kinds of foreign objects like nails or pellets, but usually not this large." Lampitt, who is expected to make a full recovery, says he might make a keychain out of it, once he's done just holding it. News Source: St. Louis Post-DispatchImage Credit: Jesse Bogan, St. Louis Post-DispatchTip: Jon Auto News Ford Coupe accident wreck ford thunderbird turn signal

Ford taps Canada-based Multimatic to build carbon fiber Ford GT

Ford has given Canadian firm Multimatic the nod to build the carbon fiber body on the new GT – The Blue Oval says it has worked with this company for 30 years. The global supplier provides parts and engineering to various automakers, and while based in Markham, Ontario it has 12 plants in Canada, the US, Mexico, England, and China. When announcing the decision at the Canadian International Auto Show, Ford says it chose them "because they have specialized equipment for carbon fiber production and expertise in carbon fiber assembly," and we've heard that the 600-horsepower coupe will be produced in a purpose-built facility at Ford's factory in Markham. Even better than that – for GT purposes and for possible hints at a Le Mans run – the Multimatic Motorsports division can be contracted for engineering and race team management. They currently produce the Boss 302R racecar in the Continental Tire SportsCar Challenge, worked on the FR500C, and their Multimatic Motorsports Lola B2K/40 won its class at the 24 Hours of Le Mans in 2000. The first models will roll off the line at the end of next year. Production numbers are rumored to be in the low hundreds, with a six-figure price tag around $200,000. They'll go into production in time for some sort of 50th anniversary celebration of the GT40 taking the the top three spots at Le Mans in 1966. Related Video: Featured Gallery 2017 Ford GT: Chicago 2015 View 30 Photos News Source: CBCImage Credit: Live images copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Coupe Luxury Performance Multimatic