2013 Ford Taurus Limited Sedan 4-door 3.5l on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

2016 Ford Explorer configurator reveals $30,700* base price, Platinum starts at $52,600*

The a la carte menu for the 2016 Ford Explorer is ready for your... umm... exploring. The first page of the refreshed model's configurator reveals the lineup, including the new Platinum trim, and price increases for three of the carryover models. The base Explorer doesn't change by one red cent: it can still be had for $30,700. The XLT needs $33,400 (a $400 price bump), the Limited goes for $41,300 (a not insignificant $2,900 price increase), and the Sport requires $43,300 (a $200 increase). That new Platinum model goes where no Explorer MSRP has gone before, beginning at $52,600 (*all prices are subject to an $895 destination charge). However, since Ford has put almost everything in it, you can't jack the price up too much further unless you lose your mind in the accessories catalog. You can quickly head that way lower down the order, though. The Limited's price jump appears to be due to the voice-activated navigation system, which comes standard; it was formerly part of a $2,600 option package. The Limited goes up by just $995 when specced with the new 2.3-liter EcoBoost, which raises the power over the 2.0-liter EcoBoost it replaces to 270 horsepower and 300 pound-feet of torque, but doesn't incur any fuel economy penalty. All-wheel drive tacks on another $2,000, safety features like active park assist and lane departure warning come as part of $3,000 Equipment Group A, and you'll still have another three pages of options to get through. On the other hand, if you just want to get your family bundle into an Explorer without spending a bundle, the base model doesn't offer any packages and only has one option over $200. Let the research begin.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.