2003 Ford Ranger Xl Standard Cab Pickup 2-door 2.3l on 2040-cars

Auto blog

Ford recalling 65k Fusions from 2014 and 2015 because key can be removed

Ford is recalling an estimated 64,869 examples of the 2014-2015 Fusion, Fusion Energi and Fusion Hybrid in North America because the key can be removed when the vehicle isn't in Park under certain conditions. Specifically, the campaign covers 56,479 units in the US, 6,048 in Canada and 2,342 in Mexico, according to the automaker's tally on November 11.
Ford says a programming problem in the instrument cluster means that the key can be removed 30 minutes after the ignition is turned off, even if the transmission is not in Park. The situation where this could happen seems quite limited, and the company is not aware of any accidents or injuries related to the issue. However, the fault puts the vehicle out of compliance with federal regulations covering theft protection and rollaways, and must be repaired.
The fix is easy: Ford will reprogram the instrument cluster at no cost to consumers. According to Ford spokesperson Kelli Felker in an email to Autoblog, "We will notify customers the week of January 5th." Scroll down to read Ford's announcement.

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video:

Ford builds Lightweight Concept with Fusion shell [w/video]

It's a fairly well known fact that removing weight from a car is essentially a panacea for many of the modern automobiles problems. Does it handle like crap? Remove weight. Underpowered? Don't add power; trim the fat. Need to improve fuel economy? It's diet time.
Actually executing a major weight reduction program, though, much like with human beings, is no easy task. Unlike you or I, where motivation is the issue, the prohibitive measure in trimming a car's waistline is money. Lightweight materials are expensive, with carbon fiber and carbon-fiber reinforced plastic still primarily in the domain of higher end vehicles. Even aluminum construction, pioneered on a mass-produced level by Audi and Jaguar, is only now starting to make its way into the mainstream, thanks to the upcoming Ford F-150.
With this concept, though, Ford is attempting to show that a mass-produced, lightweight vehicle isn't too far off. This is the Lightweight Concept, and while it may look like a Fusion, it weighs as much as a Fiesta. For reference, the lightest Fusion available to the public is the 3,323-pound, 2.5-liter model with a manual transmission. A manually equipped, 1.6-liter Fiesta, meanwhile, is just 2,537 pounds.