2002 Ford Ranger Xl Extended Cab Pickup 2-door 3.0l on 2040-cars

Auto blog

Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator

Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23.  WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

We spy the Ford Mustang King Cobra early at SEMA

As is the case with most auto shows, waiting for the reveal of hot new models is the worst part. So, while our own Drew Phillips has been wandering the halls here in Las Vegas since they unlocked the doors for SEMA 2014, we didn't expect him to come back with any big reveals until later in the day. Until this happened.
Meandering by the Ford stand, Phillips eagle-eyed a trunk lid that caught his attention. Popping out from an otherwise draped 2015 Mustang, the matte black lid clearly has the name King Cobra embossed on the rear.
That name is interesting for a few reasons: to start, Ford hasn't used the Cobra name (without "Jet" attached) since way back in 2004, so a new snake is certainly something to take note of. Second, the King Cobra name dates all the way back to the ill-remembered Mustang II, meaning there is a clear link to Blue Oval history here.