1951 Ford Truck, F1 5 Star Cab on 2040-cars
Acworth, Georgia, United States
|
1951 Ford F-1 Truck This is a five star cab that runs great, and doesn't smoke. The brakes are down from sitting, I tried to get them working but the master cylinder had a small leak, and needs to be replaced. When I got the truck the bed, and fenders were taken off of it, and when I decided to sell it I bolted it back together to make it easy to ship. The fenders, bed sides, hood, grill, lower valance panel, front bumper, and running boards are in great solid condition with no rust repair are patch panels that I can find. It has a new tailgate, front panel, rear cross member, bed to fender bolts, and a new 8 volt battery. There are three small places that will need to be patched in the cab. The first two are in the front cab corners in the flat area, and the other is on the right front floor board, I took pictures of these three small areas. All the doors, hood, and windows work as they should. I don't have the hood chrome, it looks like someone put a very nice hood on it at some point, but didn't put the hood chrome back on it, and the man I got it from didn't have it. I have a clear, and open title from Virginia if you live in a title state that you can take to the tag office to get a title with. Georgia was a none title state in 51, and they want give me a title for it. All zero feedback bidders please check with me before bidding are I will have to cancel your bid. I reserve the right to end the auction early.If you have any questions you can email me are call my cell at 404-867-3163 |
Ford Other Pickups for Sale
1936 ford pickup truck, 1/2 ton, short bed, flathead 8, 3 speed
Powerstroke v8 crew cab cab & chassis(US $14,950.00)
1950 ford truck rat rod 429 cobra v-8 engine
1936 ford pickup truck full professional restoration 1949 ford 8b a v8 flat head
Collectible 1962 ford unibody truck(US $2,500.00)
1941 ford f-1 pickup truck street rod - updates - leather - a/c - engine - paint
Auto Services in Georgia
Woodstock Quality Paint and Body ★★★★★
Volvo-Vol-Repairs ★★★★★
Village Garage And Custom ★★★★★
Tim`s Auto Upholstery ★★★★★
Tilden Car Care Abs ★★★★★
TDS Auto Service ★★★★★
Auto blog
Curtain officially comes down on Mercury as dealers remove signage
Mon, 03 Jan 2011The process of shutting down the Mercury is complete. Ford officially made the decision to close its mid-level brand in June of 2010. In the months that followed, Ford offered its dealers money to stop selling the cars, with production shutting down in September. The last Mercury, a Mariner, rolled off the assembly line in the beginning of October and former spokesperson Jill Wagner said her good-byes to both the car and her job. Now the last piece of the brand has come down as dealers are removing any and all Mercury signage from their lots.
[Source: Detroit News]Read | Permalink | Email this | Comments
2015 Ford Focus gets more Aston-y [w/video]
Tue, 04 Mar 2014With more and more members of the Ford brand adopting a new familial face, the Focus has been left looking like an odd man out. At the Geneva Auto Show, though, it properly rejoined the family, adopting the now familiar Aston Martin-ish grille that's proliferated throughout the range.
Overall, we're liking the refreshed Focus' look. Aside from the new grille, the headlights have been restyled and now look like elongated versions of the lamps on the Focus ST. Functionally, those headlamps are bi-xenon units, complete with an adaptive front lighting system. Out back, the rear retains the same overall look, which has been smoothed out for 2015.
In the cabin, the second-generation of Ford's much-maligned Sync system makes its debut. Sync 2, as it's called, is supposedly more intuitive than the first-gen system. Ford is promising "one-shot" navigation functions for the system. Saying "I'm hungry," should bring up a list of nearby restaurants. Of course, we'll be reserving final judgment until we can test the new system in person.
Ford recalls 9,900 vehicles across two campaigns
Tue, Dec 29 2015Ford is recalling a total of 9,885 vehicles in two campaigns. The Basics: In one recall, Ford will recall 9,017 examples of the 2013 Escape with build dates from January 11, 2012, to April 1, 2013, and the 2013-2014 Focus ST produced between May 3, 2012, and October 14, 2013. The Problem: Splices in the engine wiring harness might not have enough compression, and this can cause the manifold absolute pressure sensor to send incorrect signals to the powertrain control module. This issue could cause the engine to stall. Injuries/Deaths: None reported. The Fix: Dealers will replace the current crimped splices with new splices, according to the National Highway Traffic Safety Administration. If You Own One: The repair campaign will begin on January 4, 2016. More Information: Ford recalled the 2013 Escape and Focus ST in August 2014 for the same problem, and this is an expansion of that campaign, according to company spokesperson John Cangany to Autoblog. The Basics: In the smaller of the two campaigns, Ford will recall 868 examples of the 2013 Explorer, Explorer Police Utility, Taurus, Taurus Police Interceptor, Flex, Lincoln MKS, and MKT. The Problem: The fuel delivery module can crack, which would cause a fuel leak. Injuries/Deaths: None reported. The Fix: Dealers will replace the fuel delivery module. If You Own One: Owners should receive notice soon because NHTSA's report says the recall begins in December. More Information: According to Cangany, this recall is an expansion of a campaign from 2013 for these vehicles. RECALL Subject : Engine Wiring Splices may cause Stall Report Receipt Date: DEC 02, 2015 NHTSA Campaign Number: 15V813000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 9,017 All Products Associated with this Recall Vehicle Make Model Model Year(s) FORD ESCAPE 2013 FORD FOCUS 2013-2014 Details Manufacturer: Ford Motor Company SUMMARY: Ford Motor Company (Ford) is recalling certain model year 2013 Escape vehicles manufactured January 11, 2012, to April 1, 2013, and 2013-2014 Focus ST vehicles manufactured May 03, 2012, to October 14, 2013. Insufficient compression in the engine wiring harness splices to the Manifold Absolute Pressure (MAP) sensor may provide incorrect signals to the powertrain control module (PCM). CONSEQUENCE: The incorrect signals could cause the vehicle to hesitate or the engine to stall, increasing the risk of a crash.