Ford: Mustang Gt on 2040-cars
Chattanooga, Tennessee, United States
My eMail : witn0stopczynskisergio@yahoo.com
Original owner 2013 Mustang GT in excellent condition. 6 speed manual with black cloth interior. Everything about this car is excellent, pictures dont do the paint justice, its beautiful, no door dents, a couple small stone chips on the front but they are not easy to find. The car has always been garaged when not in use and has 20,301 miles on it. All maintenance was performed by the Ford dealer it was purchased from including synthetic oil changes. Car runs and drives like new and sounds great but is not loud and is still under factory warranty until 04/18. Car has GT 500 axle backs and Ford pro-cal tune that basically improves the driveabilty of the car especially on the highway in 6th gear by raising the torque band earlier, both were dealer installed and the Ford procal tool loaded with the original tune on an SD card comes with the car. The tires were at about 50% but made a lot of road noise so I replaced them with new Pirellis ($975.00) at 19,500 miles, I had the brake pads checked then and are at 70%. I do drive the car occasionally so the mileage may slightly change from the picture but is exact as of listing. It needs nothing and has been well cared for. Feel free to email with any questions.
Ford Mustang for Sale
1966 ford mustang(US $11,800.00)
Ford: mustang roush stage 3(US $16,000.00)
Ford: mustang gt/pp/roushcharged(US $14,000.00)
2011 ford mustang gtcs(US $8,700.00)
1968 ford mustang(US $12,000.00)
Ford: mustang gt premium(US $14,700.00)
Auto Services in Tennessee
Veterans Auto Services ★★★★★
Toyota Of Cool Springs ★★★★★
Sun Tech Auto Glass ★★★★★
Roger Miller`s Boat & RV Fiberglass Body Shop ★★★★★
RES Automotive ★★★★★
Quality Motors ★★★★★
Auto blog
Ford F-150 Raptor gets EcoBoost V6, new chassis and aluminum body [w/videos]
Mon, Jan 12 2015The Autoblog staff universally loves the Ford F-150 SVT Raptor, and the truck's about to get even better. Coming in the fall of 2016 (we'd assume as a 2017 model), the next off-road-ready pickup from Ford will boast an all-new, purpose-built, high-strength steel frame and a lightweight aluminum body that saves more than 500 pounds when compared to the current Raptor. It's six inches wider overall than the regular 2015 F-150, which both makes it look awfully mean but also aids in stability when driving fast off the road, and new LED lighting elements make it stand out when the sun goes dim. Under the Raptor's muscular hood will be a 3.5-liter EcoBoost V6 engine that will make more than the current 6.2-liter V8's 411 horsepower and 434 pound-feet of torque, though we don't have exact power figures for the next-gen Raptor quite yet. Also new will be a 10-speed automatic transmission, which will replace the current six-speed unit and ought to provide appropriate ratios for both rock crawling and high-speed desert trail running. Speaking of high-speed running, what makes the Raptor tick, perhaps more than any other single component, are its custom-designed suspension bits. Redesigned, larger Fox Racing Shocks with more suspension travel and all-new terrain management technology, combined with BFGoodrich All-Terrain KO2 tires, are the bits and pieces that allow for Baja-style off-roading. View 14 Photos The four-wheel-drive system in the next-gen Raptor will include a Terrain Management with settings for Normal driving, Street driving, Weather mode (for rain, snow or ice), Mud and Sand, Baja mode and Rock mode. According to Ford, the Raptor's new transfer case is designed to work as both a locking unit for crawling and a full-time unit for other off-road applications. A Torsen front differential will be optional. Basically, if all of this new stuff turns out to be as good in practice as it sounds in a press release, the next F-150 Raptor will only serve to separate Ford's off-road pickup even further from its half-hearted competitors. Feel free to watch the video and read more down below.
Next Ford Mustang to drop 400 pounds
Thu, 15 Aug 2013The Ford Mustang is already the lightest of the current crop of muscle cars, at around 3,600 pounds for a GT coupe with the six-speed manual transmission. That's almost 260 pounds less than a Chevrolet Camaro SS and about 450 pounds less than a Dodge Challenger R/T, which means the Mustang has a pretty big advantage when it comes to handling, braking, accelerating and economy. More good news: The next Mustang will be even lighter.
According to a report from Edmunds, the sixth-generation Mustang, which is set to debut at the 2014 North American International Auto Show, will shed an additional 400 pounds of body fat. That 11-percent weight reduction will be thanks to lightweight materials, with a particular focus on using stronger, but less material in construction. Aluminum will feature heavily, but Edmunds' inside source warns that there is "nothing terribly exotic" coming to the original pony car.
The other big news is that the new Mustang will be smaller overall. It's going to be 15-inches shorter than the 188.5-inch Mustang on sale today, while it'll also be 6.5 inches narrower. Shorter overhangs, both in the front and rear, are also good signs for those that want an agile Mustang.
Petrolicious pays visit to tuning sensation the Ringbrothers
Fri, 08 Nov 2013We caught up with a few projects from Ringbrothers at SEMA this year: a classic Ford Mustang body rendered in carbon fiber, and a De Tomaso Pantera-based concept that made us swoon.
It's with good timing then, that our friends at Petrolicious have uploaded their newest, well-crafted mini-documentary to the expansive airwaves of the Internet. Here, we meet the brothers Ring in person - Mike and Jim - and see how they've lent they're passion for craftsmanship to their business, along with their surname. A 1964 Ford Fairlane dubbed "Afterburner" and a 1965 Mustang called "Producer" star in this show.