2014 - Ford Mustang on 2040-cars
Richvale, California, United States
2014 Shelby GT500, black on black with stripe delete. It is fully loaded, Recaros, Nav, Track Pack, Performance Pack, Mach stereo. This is an amazing, if not the best vehicle Ford has built next to the Ford GT. The only thing is there are things Ford had to cut due to trying to keep the cost down. That is why I have custom built this one. This motor wants to breathe, so I installed a JLT carbon fiber intake, VMP 67mm throttle body, 2.40 supercharger pulley, and 90mm idler. Also, installed Redline Hood Struts. The SCT tune is for 91 and 100 octane. I am currently running VP MS109. Why not run engineered gas that is the one of the best. The biggest short coming out of the factory is the stock tires. So, I upgraded the wheels to 20x9 and 20x11, with 285 and 315 Nitto NT05. The front calipers have been painted Grabber Blue. The suspension definitely needed a few upgrades, BMR red double adjustable panhard bar and red lower control arms.
Ford Mustang for Sale
- 2008 - ford mustang(US $8,000.00)
- Ford mustang none(US $7,000.00)
- 1967 - ford mustang(US $8,000.00)
- 2007 - ford mustang(US $7,000.00)
- Ford mustang cobra svt(US $7,000.00)
- Ford mustang mach 1(US $7,000.00)
Auto Services in California
Zenith Wire Wheel Co ★★★★★
Yucca Auto Body ★★★★★
World Famous 4x4 ★★★★★
Woody`s & Auto Body ★★★★★
Williams Auto Care Center ★★★★★
Wheels N Motion ★★★★★
Auto blog
Ford to pay $17.35 million over Escape recall
Thu, 01 Aug 2013Ford had a bit of a recall spree around this time last year, with a pair of issues on the then-new 2013 Escape, followed by a recall of 423,000 2001 to 2004 Escapes because they might accelerate of their own accord. Accordingly, Uncle Sam pasted Ford with a $17.35 million fine because it took too long to inform customers, according to a report from Automotive News.
Ford agreed to settle with the National Highway Traffic Safety Administration, accepting the fine but not admitting fault. The recall, which afflicted Escapes with the 3.0-liter V-6 along with 217,000 Mazda Tributes from 2001 to 2006 and 2008, was due to faulty gas pedals that could stay down after a driver removed their foot.
Ford issued a statement regarding the fine, saying, "We take the safety of our customers seriously and continuously evaluate our processes for improvements. While we are confident in our current processes for quickly identifying and addressing potential vehicle issues, Ford agreed to this settlement to avoid a lengthy dispute with the government."
Ford recalls 434k vehicles for several unrelated issues
Mon, 07 Apr 2014It seems that the hard winter in much of the country has been as rough on some Fords as it has on many people. The Blue Oval is recalling roughly 434,000 vehicles in two separate recalls, and one of them partially caused by the salt used to melt the snow on roads.
The first recall covers 385,750 2001-2004 Escape models in the Midwest, Northeast and Canada because a subframe could rust and eventually fail. This is partially due to the road salt used in those areas, and about 349,000 of the affected vehicles are in the US. To remedy the problem, dealers are installing a reinforcement cross brace on the frame to strengthen them. There has been one crash caused by the failure but no injuries. According to The Detroit News, this is not the first rust-related recall for Ford. It estimates the company has repaired over two million vehicles since 2010 for problems on vehicles related to the iron oxide, including the rear wheel wells of the Freestar minivan.
The second recall covers 48,950 2013-2014 Ford Fusion, Escape, C-MAX and Lincoln MKZ models because welds in their seatbacks don't meet National Highway Traffic Safety Administration standards. The fault affects the front seats, and the sub-standard welds joining the setback to the recliner could increase the chance on injury. There have been no reported injuries or accidents caused by the problem, but there are 42,972 affected vehicles in the US and 4,744 in Canada.
Rising aluminum costs cut into Ford's profit
Wed, Jan 24 2018When Ford reports fourth-quarter results on Wednesday afternoon, it is expected to fret that rising metals costs have cut into profits, even as rivals say they have the problem under control. Aluminum prices have risen 20 percent in the last year and nearly 11 percent since Dec. 11. Steel prices have risen just over 9 percent in the last year. Ford uses more aluminum in its vehicles than its rivals. Aluminum is lighter but far more expensive than steel, closing at $2,229 per tonne on Tuesday. U.S. steel futures closed at $677 per ton (0.91 metric tonnes). Republican U.S. President Donald Trump's administration is weighing whether to impose tariffs on imported steel and aluminum, which could push prices even higher. Ford gave a disappointing earnings estimate for 2017 and 2018 last week, saying the higher costs for steel, aluminum and other metals, as well as currency volatility, could cost the company $1.6 billion in 2018. Ford shares took a dive after the announcement. Ford Chief Financial Officer Bob Shanks told analysts at a conference in Detroit last week that while the company benefited from low commodity prices in 2016, rising steel prices were now the main cause of higher costs, followed by aluminum. Shanks said the automaker at times relies on foreign currencies as a "natural hedge" for some commodities but those are now going in the opposite direction, so they are not working. A Ford spokesman added that the automaker also uses a mix of contracts, hedges and indexed buying. Industry analysts point to the spike in aluminum versus steel prices as a plausible reason for Ford's problems, especially since it uses far more of the expensive metal than other major automakers. "When you look at Ford in the context of the other automakers, aluminum drives a lot of their volume and I think that is the cause" of their rising costs, said Jeff Schuster, senior vice president of forecasting at auto consultancy LMC Automotive. Other major automakers say rising commodity costs are not much of a problem. At last week's Detroit auto show, Fiat Chrysler Automobiles NV's Chief Executive Officer Sergio Marchionne reiterated its earnings guidance for 2018 and held forth on a number of topics, but did not mention metals prices. General Motors Co gave a well-received profit outlook last week and did not mention the subject. "We view changes in raw material costs as something that is manageable," a GM spokesman said in an email.