2009 Ford Mustang Gt Coupe 2-door 4.6l on 2040-cars

Auto blog

Ford cuts F-150 fuel use through CNG-capable fleet sales, EcoBoost

The possibility of $1-a-gallon fuel would make a lot of US governmental entities sit up and take notice. The state of Oklahoma and the city of Dallas are making that happen. Those two entities are buying up a bunch of Ford F-150 pickups retrofitted to run on compressed natural gas (CNG), all in the name of cost savings and emissions reduction. Oklahoma is buying 256 of the F-150s, while Dallas is buying another 65. The trucks, which cost between $6,000 and $9,500 to retrofit (on top of the original price), can run on either CNG or liquefied petroleum gas (LPG). And while that's a substantial hit, conversion costs are typically paid back in three years thanks to lower refueling costs. CNG prices are as low as $1.07 a gallon in parts of Oklahoma. How much lower? The national average price for CNG is about a buck and a half less than the $3.67 average per-gallon cost of gasoline. And CNG prices are as low as $1.07 a gallon in parts of Oklahoma, where CNG is plentiful. CNG also cuts tailpipe greenhouse gas emissions by about 20 percent compared with gasoline, while the retrofitted trucks can go as far as 450 miles from their CNG tanks in addition to the 300-mile range from their conventional tanks. That's useful in a bit state like Texas. This week, the US Energy Department trumpeted a $5.9-billion loan program that Ford accessed to upgrade its factories for production of its EcoBoost engines, noting that Ford has sold a half-million F-150 trucks with EcoBoost engines. Those trucks have collectively cut fuel use by almost 57 million gallons of gas during the past three-plus years. Check out Ford's press release on the F-150 purchases below and the Energy Department's statement about its loan program here. OKLAHOMA, DALLAS ORDER 300-PLUS CNG-CAPABLE FORD F-150 PICKUPS AS DEMAND GROWS FOR ALTERNATIVE FUEL OPTION The state of Oklahoma and its agencies to buy 256 Ford F-150 trucks prepped to run on compressed natural gas; Dallas orders 65 for its fleet 2014 F-150 available with gaseous-fuel prep option on 3.7-liter V6 engine; can run on CNG or liquefied petroleum gas (also called propane autogas) By summer, Ford will offer eight vehicles that can run on clean-burning, affordable CNG; the company is on track to sell more than 15,000 such vehicles in 2014 The state of Oklahoma, its agencies and the city of Dallas have ordered a total of 321 Ford F-150 pickups that can run on compressed natural gas.

Ford recalls 83k Taurus and crossover models for halfshaft issue

Ford and the National Highway Traffic Safety Administration have issued a recall for some 83,250 vehicles in the US, for an issue with halfshafts. More specifically a "halfshaft retention circlip" might not have been properly installed on affected vehicles, with the result being halfshafts that may move improperly or disengage completely from the linkshaft while driving. The NHTSA release also notes that the issue may occur "without prior warning" which obviously factors in to the timeliness of getting this checked.
Should the halfshaft disengage, a few troubling things could happen. If it occurs while driving, power from the engine will no longer be transmitted to the wheels. And, if the vehicle is parked without the parking brake applied after disengagement of the circlip, vehicles may roll away even if they're transmissions have been placed in "Park."
Affected vehicles are as follows: Ford Edge and Lincoln MKX crossovers from model years 2012 to 2014; Ford Taurus and Lincoln MKS sedans from model years 2013 to 2014; Ford Flex and Lincoln MKT vehicles from model years 2013 to 2014.

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.