1969 Ford Mustang Mach 1 on 2040-cars
Virginia Beach, Virginia, United States
Offered for sale is my 1969 ford mustang 428 cobra jet Mach 1. This Mach 1 is equipped with the r code 428 cobra
jet engine backed by a close ratio toploader 4 speed transmission and a 3.50 traction lok 31 spline nodular rear
end. This is a nicely equipped car and is optioned with power disc brakes and power steering, tinted glass, factory
tach, fold down rear seat, visibility group and AM/FM cassette stereo radio. The car rides on 15 inch Magnum 500 wheels with BF Goodrich P215/65R15
T/A radials. The engine was represented by the previous owner to be the original factory installed unit. The block is not VIN
stamped which is typical with Metuchen built cars. The date stamped on the block reads 8J27 which corresponds to
the car's build date. Per previous owner statements the engine was rebuilt in the mid 1990's and retains its stock
bore and factory pistons. The engine is outfitted with a Holley 4150 750 cfm carb with manual choke and is retains
its original factory shaker assembly. The oil pump and fuel pump have been replaced as a preventive measure to
ensure reliability for long drives. The ignition has been upgraded to a MSD 6A electronic ignition with the module mounted out
of sight under the fender well to maintain a factory appearance. Original cast iron exhaust manifolds connect to an
original 2 1/4 inch H pipe which feeds into a 2 1/2 inch custom exhaust with correct rolled edge tips.
Ford Mustang for Sale
- 1967 ford mustang(US $17,600.00)
- 1967 ford mustang fastback(US $18,160.00)
- 1965 shelby ac cobra backdraft racing black out(US $23,200.00)
- 1973 ford mustang mach 1(US $14,400.00)
- 1969 ford mustang 428 cobra jet(US $14,800.00)
- 1969 ford mustang mach 1 s(US $22,240.00)
Auto Services in Virginia
Z Auto Body ★★★★★
Wooddale Automotive Specialist ★★★★★
White Tire Distributors ★★★★★
Vega MotorSport Window Tinting & Detailing ★★★★★
Tysinger Motor Co., Inc. ★★★★★
The Body Works of VA INC ★★★★★
Auto blog
Ford recalls 300,000 Crown Vics over lighting module
Wed, Dec 23 2015The Basics: Ford is recalling 312,814 units of the Crown Victoria and Mercury Grand Marquis sedans from the 2003-2005 model years. They were built at the St. Thomas Assembly Plant between Oct. 3, 2001, and Aug. 2, 2005. Ford says 296,004 of those units are located in the United States, with another 14,714 in Canada and 2,096 in Mexico. The Problem: The solder joints on the lighting control module could crack, depriving the headlamps of the power they need to light the way ahead. That could increase the risk of a crash, particularly at night and in other low-visibility situations. Injuries/Deaths: Ford reports that it is aware of 11 accidents that resulted from the problem, leading to one injury described as "minor." The Fix: The manufacturer is instructing dealers to replace the entire lighting control module. If You Own One: Make sure your headlights are working before getting under way. If they're not, avoid driving under low-light conditions, including at night, in heavy precipitation, or in fog. Ford Issues Three Safety Recalls and One Safety Compliance Recall in North America DEARBORN, Mich., Dec. 22, 2015 – Ford Motor Company is issuing three safety recalls and one safety compliance recall in North America. Details are as follows: Ford Motor Company issues safety recall for certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace lighting control module Ford Motor Company is issuing a safety recall for approximately 313,000 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles to replace a lighting control module. The solder joints on the module could crack and interrupt power to the headlamps – increasing the risk of crash at night. Ford is aware of 11 reports of accidents and one report of a minor injury related to this issue. Affected vehicles include certain 2003-2005 Ford Crown Victoria and Mercury Grand Marquis vehicles built at St. Thomas Assembly Plant, Oct. 3, 2001 through Aug. 2, 2005. There are a total of 312,814 vehicles that might be affected in North America, including 296,004 in the United States and federalized territories, 14,714 in Canada and 2,096 in Mexico. Dealers will replace the lighting control module at no cost to the customer. Ford issues safety recall for certain 2016 Ford F-650 and F-750 vehicles to replace rear air brake chamber Ford is issuing a safety recall for 177 2016 Ford F-650 and F-750 vehicles to replace the rear air brake chamber.
5 classic trucks and their polarizing modern revivals
Sun, Mar 3 2024EVs are helping eliminate Detroit's gas-guzzling problem. Some revivals of gas-powered classics are getting the EV treatment. But not every revived model looks exactly like its original counterpart. We're in a new era of hulking Detroit metal, and you can thank EVs. Americans can't get enough of their big, beefy trucks and SUVs. But for many years, some of the biggest gas guzzlers fell out of fashion as gas prices rose and emissions regulations tightened. But in the past few years, some of the most iconic American truck nameplates have been brought back to life with electric motors, like the GMC Hummer. In other cases, as with the Ford Bronco, improvements in engine technology and more interest in rugged adventure vehicles made a gas-powered revival possible. Even some revivals that started as gas-powered, like the Chevy Blazer and the Jeep Wagoneer, are now getting electrified spinoffs. (Even if they don't always look quite as sleek as their original inspiration.) Here are side-by-sides of five classic American trucks and their modern counterparts. The Jeep Wagoneer 1975 Jeep Wagoneer and 2024 Electric Jeep Wagoneer SStellantis After a long wait, Jeep released its revival of the classic Wagoneer and Grand Wagoneer in 2020. Starting later this year, an electric version of the luxury Jeep SUV will join the Wagoneer lineup. The Chevrolet Blazer A 1973 Chevrolet Blazer and a 2024 Chevrolet Blazer EVGetty Images, General Motors The Chevrolet Blazer was first rebooted in 2019 as a sporty family SUV. The modern Blazer shares zero resemblance to its boxy, off-roading older sibling, but it has still managed to become one of Chevy's more popular SUVs in recent years. The Blazer EV came later, and was one of the first models GM built on its new Ultium battery platform. The Hummer A Hummer H2 and the 2023 Hummer EV pickup truckGetty Images, General Motors Once the poster child for Detroit's big, bad gas guzzlers, the Hummer got new life as an electric pickup truck in 2021. The Ford Bronco A 1971 Ford Bronco and a 2022 Ford BroncoFord Motor Co. After a rouge group of engineers and designers inside Ford spent years trying to breathe life back into the Blue Oval's boxy off-roader, the Ford Bronco was finally resurrected in 2020 amid a rise in popularity for rugged adventure vehicles. The Ford Ranger 1985 Ford Ranger and a 2024 Ford RangerFord Motor Co.
Ford hiring 2,200 salaried US workers this year
Fri, 11 Jan 2013With its influx of popular new products made in the US, Ford Motor Company has announced that it intends to hire 2,200 new salaried workers domestically this year. This is the biggest increase of salaried workers for Ford in the last 10 years, and it is all a part of Ford's contract commitment to the United Auto Workers union to bring 12,000 new jobs to the US by 2015.
There were no specifics as to where in the US these job openings will be, but Ford did reiterate that it will be spending $773 million on equipment upgrades and capacity expansion at six plants located in southeast Michigan; as a whole, Ford is investing a total of $6.2 billion to its US assembly plants over the next couple years. According to recently appointed president of the Americas Joe Hinrichs, the new jobs will be focused on areas such as engineering, manufacturing and computer software. Ford will post its job openings online at careers.ford.com, and it will also use social media sites like Facebook and Twitter to recruit new workers, including military veterans.
Scroll down for more about Ford's planned job growth as well as how to go about applying for said openings.