1967 Mustang Restomod 5 Speed Supercharged Fuel Injecte on 2040-cars

Auto blog

Ford recalling nearly 24,000 Focus EV and C-Max models over door chime

Ford will be voluntarily recalling 23,830 Focus Electric and C-Max Hybrid and Energi models equipped with push-button ignition, according to The Detroit News. Why? Because the cars don't make a noise when the driver's door is open, and are therefore in violation of federal regulations. It's not as silly as Honda's badging recall that isn't a recall, but it's close.
Actually, that's not exactly fair. The chime is supposed to come on when the driver's door is open, as it reminds drivers not to leave their cars on or leave key fobs in the car, an easy thing to forget when the cars in question make virtually no noise at idle and do not require keys in ignitions.
The recall, which Ford is conducting voluntarily, covers 2012 and 2013 Focus Electric hatchbacks and 2013 C-Max Hybrid and Energi models. The overwhelming majority, around 22,900 units, were sold in the US, while the remaining 900 units are in Canada. How many of each model are covered in the recall is not immediately clear.

Ford to build next F-150, outgoing model concurrently?

Ford is rumored to be considering concurrent production for old and new F-150 models in a bid to minimize supply chain disruptions and inventory. Automotive News is reporting that the Blue Oval will build both the current F-150 and its replacement, which we showed you testing just last month, side by side for about half a year before switching over entirely to next-generation production.
As IHS Automotive analyst Mike Jackson told AN, "In order to ramp up, you have to retool...and that means you have to take capacity offline." Building both models alongside could allow Ford to cope with the still strong demand for the current F-150, while populating dealer supplies and working out supply chain kinks for the new model before making a full-time switch.
A loss of capacity when demand is so strong, even for a short period, could spell bad news for Ford, which nets an estimated 90 percent of its global profit on pickups and large SUVs. As AN states, Ford produces the F-150 in both Kansas City, Missouri and Dearborn, Michigan, which allows it to maintain some degree of flexibility in production. The new F-150 is expected to arrive at the 2014 North American International Auto Show as a 2015 model, with a design inspired by the Atlas Concept first shown at the Detroit Auto Show last January.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.