1923 Ford T Bucket Roadster on 2040-cars

Auto blog

Ford cuts F-150 fuel use through CNG-capable fleet sales, EcoBoost

The possibility of $1-a-gallon fuel would make a lot of US governmental entities sit up and take notice. The state of Oklahoma and the city of Dallas are making that happen. Those two entities are buying up a bunch of Ford F-150 pickups retrofitted to run on compressed natural gas (CNG), all in the name of cost savings and emissions reduction. Oklahoma is buying 256 of the F-150s, while Dallas is buying another 65. The trucks, which cost between $6,000 and $9,500 to retrofit (on top of the original price), can run on either CNG or liquefied petroleum gas (LPG). And while that's a substantial hit, conversion costs are typically paid back in three years thanks to lower refueling costs. CNG prices are as low as $1.07 a gallon in parts of Oklahoma. How much lower? The national average price for CNG is about a buck and a half less than the $3.67 average per-gallon cost of gasoline. And CNG prices are as low as $1.07 a gallon in parts of Oklahoma, where CNG is plentiful. CNG also cuts tailpipe greenhouse gas emissions by about 20 percent compared with gasoline, while the retrofitted trucks can go as far as 450 miles from their CNG tanks in addition to the 300-mile range from their conventional tanks. That's useful in a bit state like Texas. This week, the US Energy Department trumpeted a $5.9-billion loan program that Ford accessed to upgrade its factories for production of its EcoBoost engines, noting that Ford has sold a half-million F-150 trucks with EcoBoost engines. Those trucks have collectively cut fuel use by almost 57 million gallons of gas during the past three-plus years. Check out Ford's press release on the F-150 purchases below and the Energy Department's statement about its loan program here. OKLAHOMA, DALLAS ORDER 300-PLUS CNG-CAPABLE FORD F-150 PICKUPS AS DEMAND GROWS FOR ALTERNATIVE FUEL OPTION The state of Oklahoma and its agencies to buy 256 Ford F-150 trucks prepped to run on compressed natural gas; Dallas orders 65 for its fleet 2014 F-150 available with gaseous-fuel prep option on 3.7-liter V6 engine; can run on CNG or liquefied petroleum gas (also called propane autogas) By summer, Ford will offer eight vehicles that can run on clean-burning, affordable CNG; the company is on track to sell more than 15,000 such vehicles in 2014 The state of Oklahoma, its agencies and the city of Dallas have ordered a total of 321 Ford F-150 pickups that can run on compressed natural gas.

Ford, Samsung shack up to bring regen braking to non-hybrid models [w/video]

Ford must be desperate to get itself ready for the beach this summer because it is really trying to get into shape. Shortly after unveiling the Lightweight Concept that cut the weight of a Fusion down to that of a Fiesta, it's now the rest of the line's turn for improvement. The company is wrapping up a 10-year research project aimed at developing next-gen automotive batteries to improve efficiency.
Ford claims that 70 percent of its lineup will have stop/start tech by 2017. The key to this massive proliferation is its new dual-battery system that combines a lithium-ion battery with a lead-acid one and regenerative braking. The setup works by harvesting braking energy and converting it to electricity. When the vehicle stops, the engine shuts off, but the Li-ion battery has enough juice to keep the accessories running. The engine starts up again as drivers take their foot off the brake. The layout would mean less wasted gas while idling. It's already available on Ford hybrids and is somewhat similar to the i-Eloop capacitor-based system from Mazda.
The bigger challenge is tuning the regenerative braking right. While hybrid drivers may be a little more adventurous, when it comes to getting a hang of regen braking, conventional buyers might not be so open-minded. The systems have a tendency to be a little grabby at first and then taper off at very low speeds. Ford needs to make sure it's just right to avoid turning off buyers.

Watch how a Ford Raptor rolls down the assembly line in Dearborn

Bloomberg TV reporter Matt Miller is the proud new owner of a pretty killer truck. How do we know? The reporter headed to Dearborn, MI to Ford's assembly plant, with a film crew in tow, to see exactly how his new F-150 SVT Raptor and its mother-loving 6.2-liter V8 engine, was screwed together.
The resulting video does an excellent job of summing up how an assemblage of parts and pieces is turned into a triple-black Raptor, thanks to the work of some 1,000 employees and about 20 hours of real time. Click through below to see how the truck is born, with a surprise cameo playing the part of delivery driver at the end.