Find or Sell Used Cars, Trucks, and SUVs in USA

Scta Roadster Hot Rod Ford Model A on 2040-cars

Year:1929 Mileage:12345
Location:

Knoxville, Tennessee, United States

Knoxville, Tennessee, United States

This is a Model A roadster project that is pretty rough but fixable. It needs patch panels all the way around. The cowl has been cut right in front of the door so that will have to be welded back but that is pretty common on these. The frame has been sanded, and painted. The front and rear end came out of a running and driving 29 sedan. I was told the brakes were rebuilt but I cant attest to that for sure. The motor in it is just good for parts but the transmission looks clean in the inside. I'm sure I've missed something so ask questions if you have them. This is a very rough project. Ignore the millage. Ebay makes you put something in that field. 


On Oct-30-13 at 19:20:13 PDT, seller added the following information:

The engine that is in the car is just a parts engine. It has a hole in it where a rod went through the side. It is pretty pitted and I do not have a title for it. If you have questions about the condition of the car you are more than welcome to give me a call before bidding. 865-257-2602 Tyler

Auto Services in Tennessee

Wurster`s Foreign Car Repair ★★★★★

Auto Repair & Service, Automobile Diagnostic Service, Automobile Inspection Stations & Services
Address: Defeated
Phone: (615) 208-5654

Wheel Tek ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 5434 Pleasant View Rd, Memphis
Phone: (901) 606-6988

Wheel Tek ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 5434 Pleasant View Rd, Millington
Phone: (901) 606-6988

Wheel 1 ★★★★★

Automobile Parts & Supplies, Wheels, Automobile Accessories
Address: 816 Space Park N, Joelton
Phone: (615) 851-7217

West End Tire Sales Inc ★★★★★

Auto Repair & Service, Tire Dealers
Address: 501 W Lamar Alexander Pkwy, Louisville
Phone: (865) 982-7836

Tullahoma Tire & Brake Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Tire Dealers
Address: 400 N Jackson St, Decherd
Phone: (931) 455-1024

Auto blog

Trump did talk to Bill Ford, but the Kentucky plant was never moving to Mexico

Fri, Nov 18 2016

President-elect Donald J. Trump has been butting heads with Ford for a while now. A lot of it seems to stem from misunderstanding or misrepresenting facts about how the automaker currently does business and its plans for the future. After a sit-down with executive chairman Bill Ford Jr., the misunderstandings continue, but Trump has apparently convinced the company to make some changes. During his campaign, Trump claimed that Ford was going to fire US workers and move manufacturing to Mexico. That wasn't the case – yes, Ford planned to transfer Focus and C-Max production from Wayne, Michigan, to Cuautitlan, Mexico, but no, that wouldn't mean anyone losing their job. The Wayne plant will continue to operate, and likely busier than before, as it will be the home of the new Bronco and Ranger. So Ford CEO Mark Fields responded with the facts, and then chairman Bill Ford Jr. sat down with Trump over the summer. Things apparently weren't resolved to Trump's satisfaction, so he and Bill Ford spoke on the phone yesterday as he claims in this tweet: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Let's pick that apart. First off, it's not a Lincoln plant, per se – the Louisville Assembly Plant currently builds the Ford Escape and Lincoln MKC, two small crossovers that share a platform. Ford was considering moving MKC production out of Kentucky to Mexico, but it would not have resulted in many lost jobs if any – the union had already agreed to moving the MKC in 2015 negotiations, and taking production of the slow-selling Lincoln out of the plant would open up capacity for more Fords. Be that as it may, Ford has decided not to move MKC production out of the plant, either for political reasons of placation or because it didn't make the greatest deal of business sense, maybe a combination of the two. That means Trump isn't really saving any American jobs in the short term. If anything, this move could keep Ford supply-constrained and result in reduced sales, which in turn brings the company less money and affects the bottom line and all employees. But that's speculation, so we won't tweet it. There is of course the possibility that Ford will be convinced, either by sheer will or by a more attractive trade situation, to invest in increased US production, which could bear fruit later on. We are told by Ford that the two men did in fact speak yesterday.

Ford Mustang SVT caught looking fierce on the 'Ring

Tue, 15 Jul 2014

The next-generation Ford Mustang SVT is one of the most anticipated performance cars of the moment. We've already seen it testing multiple times, but it has always been covered is some very heavy camouflage. However, Ford has just given us our best view yet of the new muscle car. According to our spy photographer, the Mustang was at the Nürburgring for high-speed testing, which meant that the Blue Oval had to remove most of the heavy obfuscation that the SVT has worn previously.
The stylish, more revealing camo makes picking out some of the more interesting details about the SVT rather easy. Starting from the front, there is the big hood scoop to feed cold air to its still mysterious engine. You can also immediately make out the model's new grille and lower front air dam. It has a vertical piece running from the bottom of the hood all the way to the ground. The aggressive styling almost gives the 'Stang the look of two fangs ready to bite down. The hood seam is even taped off here, which shows us its outline.
Around the side, it appears that the front and rear fenders are wider than stock, and the sills are certainly much larger. You can also just make out the SVT's bigger brakes behind its black wheels with a polished lip. Finally, at the rear, things appear mostly stock other than the diffuser that the exhaust outlets nestle into.

Ford patents a multi-touch version of its classic keypad

Fri, Sep 9 2016

For decades, Ford has offered a keypad on the doors of their cars that would allow owners access with the right code. Amazingly, the keypad has survived almost unchanged except for a recent touch button version. A new patent from the Blue Oval shows the keypad may get a big upgrade soon. The first big change is that it looks like the keypad may move to the key fob. Although it might be possible to have it on the car itself as well, the patent only seems to focus on the key fob. In addition, the fob will now be a multi-touch pad similar to that of modern smartphones. This will allow for more diverse code entries, according to the patent's description. Instead of just a simple number code, owners could enter a code that involves swipes and keystrokes, and even simultaneous keystrokes. For instance, you could enter a code that requires swiping from 1 to 3, followed by holding 2 and 4 to unlock the car. The patent also seems to indicate that this keypad would then display unlock functions and other functions on the fob after the correct code is entered, thus making it more than just a way to unlock the car. As for the practical implications of this keypad system update, it could provide an added layer of security. If someone steals your keys, they would have to also know your access code to get into the car. Whether this would also help make the key and car harder to hack would remain to be seen, though. Another possible benefit could be the prevention of accidental lock and alarm button presses, although that likely isn't a common issue. There could be potential downsides as well. If used as an extra layer of security, the legitimate owner would have to punch in their code on the fob to get in, which would render proximity key benefits relatively useless. Moving the keypad to the fob would also mean owners couldn't get into their cars without having the key with them. We don't have any clues as to when this could become a feature, but it doesn't seem like it would be difficult to implement, so it could show up in the next few years. Related Video: News Source: United States Patent and Trademark OfficeImage Credit: Ford, United States Patent and Trademark Office / Ford Auto News Ford Lincoln Technology keyless entry