Ford: Model A Coupe on 2040-cars

Auto blog

Inside Ford's high-tech climate chamber

There are two ways an automaker can test its vehicles in extreme climates: it can send said vehicle around the world – from Death Valley to the Arctic Circle – in search of the harshest weather, or it can recreate those conditions in an enclosed environment. We're sure that many automakers undertake some combination of both, but in this latest video clip, Ford shows us around inside it's state-of-the-art climate chamber. At its Driveability Test Facility in Allen Park, MI – inaugurated in 2010 just across the street from the Roush Technology Center – Ford can simulate all sorts of extreme conditions. It can drop the temperature down to -40 degrees Fahrenheit or raise it up to 130, and take it up to a simulated 12,000 feet above sea level or drop it down to 280 feet below. blast it with 150-mile-per-hour winds. It can control the level of humidity, approximate the intensity of the sun and even blast the test vehicle with artificial snow, just like your favorite ski resort. The facility strikes us as an engineering feat as impressive as some of the vehicles it's used to test, but don't take our word for it – scope it out for yourself in this brief two-minute video clip, which even includes some helpful tips for winter driving this holiday season and beyond. News Source: Ford via YouTube Plants/Manufacturing Ford Videos Michigan winter

Ford exec downplays idea of aluminum-intensive cars

Ford certainly made waves when it rolled out the all-new 2015 F-150 made primarily out of aluminum. But while trimming weight off its vehicles is a top priority for the Detroit automaker, we shouldn't expect the lightweight metal to be used as widely on passenger cars as it has been on its new pickup. Speaking at the Automotive News World Congress on Wednesday, top Ford exec Joe Hinrichs said that using aluminum in passenger cars isn't as beneficial as it is in trucks – primarily because the weight savings isn't as dramatic, or as deeply needed. Though improved fuel economy is certainly one advantage of aluminum construction in a truck like the F-150, low prices at the pump have prompted Ford to highlight another advantage, and that's capability: With less weight on its own, a lighter-weight truck can carry and tow more than a heavier one, because it all comes down to combined weight ratings. Ford is expected to make the new F-Series Super Duty largely out of aluminum for the same reasons, and we wouldn't be surprised to see the next Expedition use the material as well. But while certain components in Ford passenger cars will be made of aluminum, we shouldn't expect entire chassis and bodywork assemblies to use the material as extensively as on the F-150, or on more upscale passenger cars from the likes of Audi or Jaguar. Dearborn is, however, investing in other lightweight materials. It has a joint venture with Dow Chemical to put carbon fiber into mass production, much as BMW has with its i3. The Blue Oval will use a combination of carbon and aluminum on its 2017 GT supercar, and it has stripped weight by removing amenities from the 2016 Mustang GT350R, but apparently neither is a method Ford can practically apply to its volume models. Related Video: Featured Gallery 2015 Ford F-150 View 36 Photos News Source: TheDetroitBureau.com, Automotive News - sub. req.Tip: Ford Green Ford aluminum joe hinrichs

Junkyard Gem: 1971 Mercury Comet 2-Door Sedan

When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.