Find or Sell Used Cars, Trucks, and SUVs in USA

1970 Galaxie 500 Xl on 2040-cars

Year:1970 Mileage:74361 Color: orange and black /
 Black
Location:

Macungie, Pennsylvania, United States

Macungie, Pennsylvania, United States
Advertising:
Transmission:Automatic
Body Type:Coupe
Engine:429
Vehicle Title:Clear
Fuel Type:Gasoline
For Sale By:Private Seller
VIN: 0e55y200911 Year: 1970
Interior Color: Black
Make: Ford
Number of Cylinders: 8
Model: Galaxie
Trim: XL
Drive Type: C6 automatic
Mileage: 74,361
Sub Model: XL
Warranty: Vehicle has an existing warranty
Exterior Color: orange and black
Condition: UsedA vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections.Seller Notes:"Project car"

Good project car. Originally a Teal Galaxie 500 now a XL with a 1972 429 Mercury eng & tranny with 65k on engine & total rebuild on tranny.Rebuilt starter & alternator. Starter need to be installed. New tires. Interior dash has 2 very small holes and looks great. Driver seat needs work back seat has no holes either.Needs paint,little rust on quarters, jack slipped and dented the right front fender,rusted trunk and pass floor. I have extra part trunk lid and floor,hood,passenger floor,left front fender and original grill. Any questions you can call Joe at 484- 264-2860 I will be auctioning a 429 Cobra Jet D1VE AA6015 block 429 SCJ heads D00ER 429 Intake manifold DOOE 9425 also a Victor JR intake and a Dominator carb. So keep watching for them. Thank you and good luck bidding!!!

Auto Services in Pennsylvania

Wood`s Locksmithing ★★★★★

Auto Repair & Service, Locks & Locksmiths, Keys
Address: Columbia-Cross-Roads
Phone: (607) 731-8382

Wiscount & Sons Auto Parts ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: Lebanon
Phone: (717) 647-2629

West Deptford Auto Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Transmission
Address: 466 Crown Point Rd, Sharon-Hill
Phone: (856) 848-5020

Waterdam Auto Service Inc. ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Auto Oil & Lube
Address: 1041 Waterdam Plaza Dr, New-Eagle
Phone: (724) 941-9110

Wagner`s Auto Service ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 514 Market St, Forty-Fort
Phone: (570) 288-2689

Used Auto Parts of Southampton ★★★★★

Automobile Parts & Supplies, Automobile Parts & Supplies-Used & Rebuilt-Wholesale & Manufacturers, Used & Rebuilt Auto Parts
Address: Wycombe
Phone: (215) 396-9109

Auto blog

Ford Mustang Mach-E fails Sweden's moose test

Wed, Sep 29 2021

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Ford director says company has big efficiency plans, but no dedicated EV

Wed, Mar 12 2014

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.

Submit your questions for Autoblog Podcast #310 LIVE!

Mon, 26 Nov 2012

We record Autoblog Podcast #310 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #310
Buick GN and GNX will return