1966 Ford Galaxie 500 Xl 4.7l (289 Cu.in.) on 2040-cars

Auto blog

Ford recalling 390,000 cars over door latch woes

Ford is recalling certain Fiesta, Fusion and Lincoln MKZ vehicles due to faulty door latches, marking the latest in what seems to be a recurring issue for the Blue Oval. This is the third door latch recall from Ford in 2015, following a 213,000-unit recall in March and a 205,000-unit recall in January. This one, however, is significantly larger. A total of 390,000 units are affected, including Fusions and MKZs from model years 2013 and 2014, as well as Fiestas from model years 2012 to 2014. A "broken pawl spring tab" is the culprit, potentially keeping doors from latching shut. According to Ford, even if the door does shut, it could come open again without warning. The affected Fiestas were built between February 1, 2012 and May 31, 2013 at the Cuautitlan, Mexico factory. The Fusion and MKZ siblings, meanwhile, were screwed together at Hermosillo Assembly in Mexico between July 1, 2012 to May 31, 2013. Ford is aware of three minor reports of door malfunctions. In two cases, the door bounced back open, quite literally hitting drivers on their way out. In the third case, a door swung open of its own accord while a driver was attempting to park, hitting another vehicle. Ford will notify owners, who will need to report into dealers to have all four latches replaced. Scroll down for the official press release. Related Video: APR 24, 2015 | DEARBORN, MICH. FORD MOTOR COMPANY ISSUES SAFETY RECALL IN NORTH AMERICA FOR DOOR LATCH ISSUE ON FORD FIESTA AND FUSION, LINCOLN MKZ Ford Motor Company is issuing a safety recall for approximately 390,000 2012-2014 Ford Fiesta and 2013-2014 Ford Fusion and Lincoln MKZ vehicles for a door latch issue. The door latch in these vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck an adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2012-2014 Ford Fiesta vehicles built at Cuautitlan Assembly Plant, Feb.

Shelby GT500 and Roush Stage 3 go head to head at the drag strip

The Ford Mustang is a brilliantly affordable source of horsepower, with a base 300-plus-horsepower version available for well under $30,000. Jumping up to about $35,000 will get you a solid 420 horsepower from a high-revving V8, while those with some extra disposable income can get a pair of 600-plus-horsepower monsters. Both the Roush Stage 3 with its Phase 3 package and Ford's factory Shelby GT500 even crest the 650-horsepower mark, with 675 and 662 ponies, respectively.
Naturally, someone needed to find out which of these hi-po Mustangs was the quickest. And while this video is quite obviously a dealership commercial, at least there's some solid drag racing between two of the most powerful performance machines available for under $100,000.
With two NHRA drag racers at the wheel, the Stage 3 and GT500 go head to head for three races. Scroll down below to see the results in the full video.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.