2014 Ford Fusion Se on 2040-cars

Auto blog

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Ford Explorer, Expedition next to go aluminum?

Ford made some serious waves when it unveiled the latest F-150. Instead of making its bodywork out of steel, like just about every other truck on the market, Ford went with aluminum. And you can bet the F-150 won't be the last Ford model to go with the lightweight alloy construction, either.
Our compatriots at Edmunds report that Dearborn is considering replacing two of its most popular SUVs with aluminum versions. One candidate is the Expedition, which would make sense considering that the current model (like the two preceding generations and the fullsize Bronco before it) is based on the F-150's underpinnings. Another is the Explorer, which was traditionally based on the Ranger pickup but went with a car-like unibody chassis in its current iteration. If the Explorer does go the way of aluminum, don't expect it to be a part of its very next update, which is likely due too soon for such major changes.
It would stand to reason that, if the Expedition were to go aluminum, so would the next-generation Lincoln Navigator. Ditto the MKT together with the Explorer. But those aren't likely to be the only models in contention for aluminum construction. Like any other automaker, Ford is under pressure to steadily reduce its carbon emissions and improve its fuel economy figures, prompting it to look at a whole range of measures - including more efficient engines, lower rolling-resistance tires, active aerodynamics and lightweight construction. Expect aluminum to play a big part in that equation moving forward.

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.