2007 Ford Freestar Wagon Se on 2040-cars

Auto blog

Ford recalling 390,000 cars over door latch woes

Ford is recalling certain Fiesta, Fusion and Lincoln MKZ vehicles due to faulty door latches, marking the latest in what seems to be a recurring issue for the Blue Oval. This is the third door latch recall from Ford in 2015, following a 213,000-unit recall in March and a 205,000-unit recall in January. This one, however, is significantly larger. A total of 390,000 units are affected, including Fusions and MKZs from model years 2013 and 2014, as well as Fiestas from model years 2012 to 2014. A "broken pawl spring tab" is the culprit, potentially keeping doors from latching shut. According to Ford, even if the door does shut, it could come open again without warning. The affected Fiestas were built between February 1, 2012 and May 31, 2013 at the Cuautitlan, Mexico factory. The Fusion and MKZ siblings, meanwhile, were screwed together at Hermosillo Assembly in Mexico between July 1, 2012 to May 31, 2013. Ford is aware of three minor reports of door malfunctions. In two cases, the door bounced back open, quite literally hitting drivers on their way out. In the third case, a door swung open of its own accord while a driver was attempting to park, hitting another vehicle. Ford will notify owners, who will need to report into dealers to have all four latches replaced. Scroll down for the official press release. Related Video: APR 24, 2015 | DEARBORN, MICH. FORD MOTOR COMPANY ISSUES SAFETY RECALL IN NORTH AMERICA FOR DOOR LATCH ISSUE ON FORD FIESTA AND FUSION, LINCOLN MKZ Ford Motor Company is issuing a safety recall for approximately 390,000 2012-2014 Ford Fiesta and 2013-2014 Ford Fusion and Lincoln MKZ vehicles for a door latch issue. The door latch in these vehicles may experience a broken pawl spring tab, which typically results in a condition where the door will not latch. If a customer is then able to latch the door, there is potential the door may unlatch while driving, increasing the risk of injury. Ford is aware of two allegations of soreness resulting from an unlatched door bouncing back when the customer attempted to close it, and one accident allegation when an unlatched door swung open and struck an adjacent vehicle as the driver was pulling into a parking space. Affected vehicles include certain 2012-2014 Ford Fiesta vehicles built at Cuautitlan Assembly Plant, Feb.

Next Ford Raptor spotted wearing aluminum skin

Well, look at what we have here. Judging from these spy shots, Ford is indeed working on the next generation of its off-road-ready F-150 Raptor pickup truck. We've made no attempt to hide our appreciation for the Baja-style truck, which combines most of the usability of a fullsize truck with heavy-duty suspension components to make a kind of performance vehicle that is unique in the market.
What we haven't known, until now, is whether Ford would push forward with its Raptor program now that it has a completely new F-150 to serve as its base. And that's especially true since Ford made the bold move of switching the bodywork of its best-seller from tried-and-true steel to aluminum. As you can see above, the front and rear of this silver truck are clad in current-gen Raptor bodywork, while the center section that houses the occupants appears to come from the upcoming 2015 F-150.
Dissecting the views above, we note a few interesting tidbits. First, there looks to be a bulge in the truck's hood. Second, we see a new grille between the current Raptor's headlights, sporting a mesh finish and two horizontal bars. Lastly, our eyes can't help but lock in on those burly A-arm suspension pieces down below, not to mention all that ground clearance the specialty suspenders bring to the table.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.