2013 Ford Focus Se on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost loses big power on 87 octane

The 2015 Ford Mustang with the 2.3-liter EcoBoost four-cylinder is a pretty potent package on paper. With 310 horsepower and 320 pound-feet of torque, it boasts better performance numbers than the 3.7-liter V6, but with better fuel economy as an added benefit. However, if you're in the market for one of these boosted 'Stangs, you should probably keep in mind that it really prefers to gulp premium, 93-octane fuel. It can drink 87-octane swill in a pinch, but you're going to find significantly less power underfoot when pulling away. While it's not shocking that the ponies are dialed back with a lower grade of gasoline, an alleged page from a Ford training manual obtained by Mustang 6G purports to show just how much power is lost, though. According to this document, the 2.3-liter EcoBoost makes 275 horsepower and 300 pound-feet of torque when running on lower octane fuel. That's a substantial reduction of about 11.3 percent compared to when the engine drinks 93 octane. Interestingly, according to Mustang 6G, that finding was a bit better than expected, because a Ford engineer reportedly said power would be down about 13 percent without altering peak torque. In speaking with Autoblog, Paul Seredynski of Ford powertrain communications, objected to part of this document. While he couldn't confirm the specific losses listed for the Mustang EcoBoost, "torque remains unchanged" with lower octane gasoline, Seredynski said. He speculated this training manual page was "possibly from before the engine was certified" and therefore showed incorrect figures. Serendynski did confirm that the automaker recommends using 93 octane, and like all modern engines, the software adapts if it's lower. "Peak power would be reduced" by using a lesser grade, he confirmed. Featured Gallery 2015 Ford Mustang EcoBoost: First Ride View 20 Photos News Source: Mustang 6GImage Credit: Copyright 2015 AOL, Ford, Mustang 6G Ford Technology Convertible Coupe Performance ecoboost ford mustang ecoboost

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

2018 Ford F-150 Powerstroke vs. 2018 Ram 1500 EcoDiesel: comparing the specs

Now that Ford has finally released specifications for its diesel Ford F-150, we can finally see how it stacks up against its sole competition, the Ram 1500 EcoDiesel. Naturally, since we haven't driven the new diesel F-150, we can't tell you which is better on the road, but there are interesting things we can glean from the numbers. Compare these and other potential new vehicle purchases using our tool. For one thing, the two trucks are extremely similar from a powertrain perspective. Both trucks use a turbocharged 3.0-liter V6 diesel, with the Ford using a 10-speed automatic, and the Ram using an 8-speed automatic. The Powerstroke engine is built in the U.K. but specifically tuned by Ford for American pickup truck duty. It is also is related to the diesel V6 used by Jaguar and Land Rover. The Ram 1500's engine is made by VM Motori. Only 10 horsepower and 20 pound-feet of torque separate the two, with the Ford getting the slight advantage. The Ford also produces its horsepower and torque slightly sooner than the Ram. Peak power in the Ford comes at 3,250 rpm compared to 3,600 rpm in the Ram, and peak torque arrives at 1,750 rpm in the Ford, and 2,000 rpm in the Ram. View 9 Photos More significant differences become apparent in the payload and towing area, both of which put the Ford at an advantage. The F-150 Powerstroke can carry 2,020 pounds of cargo, or tow 11,400 pounds. The Ram EcoDiesel, depending on configuration, can carry 1,100 to 1,600 pounds of cargo, and tow between 7,560 and 9,210 pounds. Fuel economy might go to the Ford if it hits the company's target of 30 mpg highway. That would beat the Ram's 27 mpg highway. We don't know what Ford's target city mpg is, but the Ram manages 20 in town with two-wheel drive. Four-wheel drive drops the city rating to 19 mpg. View 6 Photos The biggest decider between the trucks might be cost. Ford is only offering its diesel engine on higher end trims, which means that the cheapest diesel F-150 starts at $46,315. That's for a two-wheel drive Lariat extended cab with a 6.5-foot bed. Ram on the other hand, offers the diesel in everything from its ultra-bare-bones Tradesman pickup, allowing for a base price of just $28,585, up to the fancy Laramie Longhorn and Limited trims. Ram's diesel is also available with all cab variants, while Ford's is only offered in extended- and double-cab body styles.