09 Htd Lthr Sunroof Sync Pwr Hatch 62k Mi 1 Owner Net Direct Auto Sales Texas on 2040-cars

Auto blog

Ford reveals EcoBoost-powered Riley prototype for Daytona 24

It's not the first time Ford has participated in the Daytona Prototype class as an engine supplier, but in revealing this new EcoBoost V6-powered Riley Technologies prototype for the new United SportsCar Championship, Ford is making a statement: "We want to show Ford EcoBoost's capabilities as an engine that provides both performance and fuel economy, on and off the track," says Jamie Allison, director of Ford Racing.
In addition to supplying the 3.5-liter twin-turbocharged V6, Ford had its production designer Garen Nicoghosian give the racecar brand-inspired design cues with support from Ford Racing chief aerodynamicist Bernie Marcus.
The car is scheduled to compete at next year's Rolex 24 at Daytona on January 25-26, but before that, Michael Shank Racing is working with Ford at another goal. Driving his Ford Thunderbird, NASCAR champion Bill Elliott set the track's top speed record at 210.364 miles per hour during a qualifying run for the Daytona 500 - way back in 1987 -- and Ford thinks it's about time for that record to fall. What better time the introduction of this new Ford-powered Daytona Prototype? Michael Shank Racing plans to use the twin-turbo V6-powered racer to beat Elliott's record, and it expects to begin prepping for the top-speed run on October 9. Scroll down for the full press release below on Ford's latest race effort.

2016 Ford Focus RS may yet be AWD, US sales likely

When it comes to forbidden fruit, few vehicles are spoken of in as hushed a tone as the Ford Focus RS. The turbocharged, five-cylinder hot hatch could only be seen from afar by American customers as it tore up the roads of Europe. And while it's safe to say that Ford's Yankee fans are quite happy to now be on equal footing with drivers in the old country thanks to the Focus ST, we doubt there'd be much protestation over a successor to the RS arriving stateside.
Of course, we've seen images of the new RS undergoing testing, but a new story by Road and Track aims to fill in some very large blanks in our knowledge of that car, thanks to a pair of mysterious insiders at the Ford. Chief among those is this - the RS will almost certainly make its way to the US, albeit in limited quantities. It gets better, though.
Under hood, the new RS is unsurprisingly expected to borrow the 2.3-liter, turbocharged four-cylinder from the 2015 Ford Mustang and 2015 Lincoln MKC. While that twin-scroll turbo produces 310 horsepower in the Mustang and 285 ponies in the MKC, R&T expects the RS to deliver quite a bit more firepower - 325 to 350 hp, with preference going to the higher output due to the limited-edition nature of the RS. This roughly fits with previous reports.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.