1988 Ford Festiva on 2040-cars
Perry, Georgia, United States
Fuel Type:Gasoline
For Sale By:Private Seller
Warranty: Vehicle does NOT have an existing warranty
Make: Ford
Model: Fiesta
Mileage: 205,612
Here for sale is a 1988 Ford Festiva base model. This was one of the earliest Festivas imported into the U.S. in the 80s. As you can see by the sticker in the door frame, it was actually built in June of 1987. This car is basic transportation. It has the original 1.3 liter 4 cylinder. And since it was a base model it was a carbureted engine with a manual four speed transmission.
This odometer reads just over 205K miles,which I assume to be correct. The car puffs a little smoke on start up. This goes away after it runs for a while. That is to be expected on a car with this mileage. It has a rust spot just in front of the driver side tail light. It should be fairly easy to repair. The grey carpet is loose at the top corners near the dash on both sides. And as can be seen in the pictures, the front bumper cover is busted. However, we have several Festiva parts cars as well as a container of extra parts. So I can PROBABLY provide the buyer with another bumper cover for free or at least very reasonably. Aside from that I don't know of any other problems with this car.
The previous owner installed new tune up parts just prior to selling it to us. As in,spark plugs,wires,cap and rotor. He also installed a new set of 12" tires all the way around. There is a Blaukpunkt AM/FM/CD player mounted in the dash,but right now I have misplaced the faceplate. Still searching for it. The passenger side rear window is currently covered with vinyl which peels off easily. Window is not damaged.
Anyone that has owned one of these cars either still owns one or wants another one. They are cheep to drive and maintain. They are also easy to work on. And they are NOT getting any easier to find. Feel free to call or text me at 478 733 2873 for more pics or details. Thanks for looking.
Ford Fiesta for Sale
- Se 1.6l 4 cyl 1 owner clean car fax ford certified warranty! we finance! trades
- 1989 ford festiva l hatchback 2-door 1.3l
- 2013 ford fiesta se sedan damaged salvage only 7k miles economical wont last!!(US $5,900.00)
- 2011 ford fiesta sel auto htd leather alloy wheels 38k texas direct auto(US $14,480.00)
- Sync blutooth automatic white cloth florida car one onwer not rental or fleet
Auto Services in Georgia
Wheel Wizard ★★★★★
Uzuri 24-HR Plumbing ★★★★★
Used tires Atlanta ★★★★★
ultimateworks ★★★★★
Tyrone Auto Mobile Repair ★★★★★
Top Quality Car Care ★★★★★
Auto blog
Creations n' Chrome Top Notch Mustang is a one-of-a-kind fox
Thu, 07 Nov 2013Is there a cooler car from the 1980s and early 90s to mod than a Fox-body Ford Mustang? No, there isn't. If you disagree with us, we suggest you have a look at this 1990 Mustang Coupe, which just might change your mind. Although considering just how extensively modified this car - the Top Notch Mustang from Creations n' Chrome - is, we wonder just how much Ford is left in this old pony.
It rides on a custom race tube chassis that weighs a scant 700 pounds, while carbon-fiber bits and bobs help lower the overall curb weight to a mere 2,400 pounds. When paired with supercharged, 5.0-liter, Aluminator V8 from Ford Racing, the results are, doubtlessly, exciting. 855 horsepower at the rear wheels and 667 pound-feet of torque are available from that force-fed V8 should be just plenty for this car's intended purpose of running in standing-mile competitions.
The Top Notch Mustang is more extreme than just weight savings and a big engine, though. That 5.0-liter is essentially in what's known as a front-mid layout - where the engine is actually behind the front axle. In this case, the 5.0-liter V8 is 17 inches further back than a factory Fox-body, for better weight distribution. As a result, the cabin has been completely overhauled. An SLA front suspension, wheels from HRE, Wilwood brakes and Sparco interior items round out the extensive list of mods.
Automotive Grade Linux will be the backbone of your connected car
Fri, Jan 6 2017Creating a backend for a secure, reliable, and expandable infotainment system is costly and time consuming. The Linux Foundation, a non-profit organization, has set out to promote and advance the Linux operating system in commercial products. Automotive Grade Linux, or AGL, is a group within the Foundation that seeks to apply a Linux backend to a number of automotive applications in a variety of vehicles from various suppliers and manufacturers. AGL's goal is to create a common, unifying framework that allows developers and manufacturers to easily implement applications across platforms. Currently, the focus is on infotainment systems, but AGL has plans for instrument clusters, heads-up displays, and eventually active safety software. At CES, a display from Panasonic showed a completely digital and customizable dashboard that allows information and apps to be moved from the gauge cluster to the infotainment screen and back, all through the use of gesture and touch controls. Although the organization has been around for five years, it's really only been in the past three that the group has been working hand in hand with automakers and suppliers. The first two OEMs to participate, Toyota and Jaguar Land Rover, have since been joined by Mazda, Suzuki, Ford, and, as of this week, Daimler. The latter is important as until now most of AGL's partner's have been based in Japan or the US. Other partners include suppliers Denso, Renesas, Continental, Qualcomm, and Intel. AGL want's to supply roughly 80 percent of the backend, allowing partners to then finish and refine the Linux system for each individual application. Think of how the Android operating system is refined and customized for individual smartphones from Samsung, LG, and Motorola. While the final product looks different, developers can have an application that will work across all AGL systems. Because it is open source, anyone can use and develop for AGL. You can even go onto the group's website and download a copy right now. There is also a software development kit available that helps facilitate app creation on the platform. Vehicle development cycles take roughly five years, so there currently are no cars that run an AGL backbone available for consumers. AGL Executive Director Dan Cauchy says products should be hitting the market later this year, with even more coming in 2018. Right now, the industry is relatively fragmented when it comes to infotainment and related systems.
2015 Ford Edge debuts with fresh tech inside and out
Tue, 24 Jun 2014
Edge will be the first Ford-badged product to come standard with EcoBoost power.
Ford officially unveiled the all-new, third-generation Edge today at its Dearborn home, announcing that the latest version of the popular crossover will ride on the same CD4 architecture that underpins the Ford Fusion and Lincoln MKZ. The Edge will also be the first Ford-badged product to come standard with EcoBoost power.