1962 Ford Falcon V/8 302 Pro Street on 2040-cars

Auto blog

These horribly misguided front-drive design studies nearly became the Mustang

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.

2015 Ford Transit

As a segment, fullsize vans are stealth-fighter invisible on most consumers' radar. Visit a dealership for any of the four brands that offer them and you'll be lucky to find even one on display. These are commercial vehicles primarily, even more so than pickup trucks. Vans are the shuttles for plumbers, caterers, carpenters, concrete layers, masons, electricians, florists and flooring, and a huge part of this country's productivity is accomplished using them. At the moment, Ford is the 800-pound gorilla in that room - fully 41 percent of commercial vehicles wear a Blue Oval. So when Ford announced three years ago it would be ditching its commercial bread-and-butter E-Series, it meant the Transit that would be replacing the Econoline had huge, 53-year-old shoes to fill.
We were still a bit nostalgic about Econoline vans going away until going directly from the Transit first drive in Kansas City to an E-350 airport shuttle. Climb up through the Econoline's tiny double doors and bang your head on the opening, crouch all the way to your seat then enjoy a loud, rattle-prone, creaky, harsh ride on beam-hard seats while struggling to see out the low windows. This is an experience nearly every traveler has had. By comparison, the Transits we'd just spent two days with were every bit of the four decades better they needed to be. It cannot be understated just how much better the Transit is in every single way. The load floor is barely more than knee high. There's a huge side door, and hitting your head on a door opening is nearly impossible. Stand up all the way if you're under six-foot, six-inches - no more half-hunching down the aisle. There are windows actually designed to be looked out of. The ride is buttery smooth, no booming vibration from un-restrained metal panels and no squeaks. Conversations can be held at normal levels rather than yelling over the roar of an ancient V8. The seats are comfortable. The AC is cold. There are cupholders.
Enough anecdote-laying, what's in a Transit? We're talking about a very fullsized unibody van that's enjoyed a 49-year history in Ye Olde Europe. This latest iteration is part of the "One Ford" initiative, so it was designed as a global offering from the get-go, eschewing the body-on-frame construction the E-Series has used since 1975. Instead, the Transit integrates a rigid ladder frame into an overall frame construction made of high-strength cold-rolled and boron steel. The suspension is a simple but well-tuned Macpherson strut array up front with a rear solid axle and leaf springs.

Watch how a Ford Raptor rolls down the assembly line in Dearborn

Bloomberg TV reporter Matt Miller is the proud new owner of a pretty killer truck. How do we know? The reporter headed to Dearborn, MI to Ford's assembly plant, with a film crew in tow, to see exactly how his new F-150 SVT Raptor and its mother-loving 6.2-liter V8 engine, was screwed together.
The resulting video does an excellent job of summing up how an assemblage of parts and pieces is turned into a triple-black Raptor, thanks to the work of some 1,000 employees and about 20 hours of real time. Click through below to see how the truck is born, with a surprise cameo playing the part of delivery driver at the end.