Diesel 6.4l 4x4 Turbocharged Locking/limited Slip Differential Tow Hitch Abs on 2040-cars

Auto blog

Ford and Mercedes join Renault in French emissions investigation

The French government is investigating certain models from Ford, Mercedes-Benz, and Renault because they allegedly produce more nitrogen oxide than the country's pollution rules allow, according to Automotive News, citing a French newspaper. After VW's emissions scandal, French regulators began checking more vehicles for evidence of defeat devices and excessive real-world pollution. According to Automotive News, the Mercedes S350 allegedly showed inconsistent results across these tests, and a Ford C-Max had NOx levels five times over the limit. The Renault Captur crossover, Espace, and an unnamed utility vehicle also had results that were too high. The French testing for this investigation includes an on-road emissions check that's not part of the EU's normal evaluations, which some automakers claim is unfair. "Unofficial on-road testing has varying conditions and can produce significantly different results," a Ford of Europe spokesman told Automotive News. Renault representatives met with French officials on January 18 to explain the situation. The company later submitted a plan to recall 15,800 examples of the diesel Captur, and said it would offer a voluntary software upgrade for about 700,000 other vehicles, according to Automotive News. Representatives from Ford and Mercedes will meet with the government soon, too. Renault's stock price plunged last week after investors heard that French regulators searched three of the automaker's sites as part of the emissions investigation. The stockholders feared an environmental scandal like the one currently embroiling Volkswagen. There's one major difference – as of now, there's no evidence Renault equipped any of the polluting models with defeat devices. Related Video:

'Car Wars' says Ford, Honda to pick up share, Fiat-Chrysler ambitions downplayed

Don't look for a tremendous shifts in automotive market share over the next three years because it might not be coming. That's at least according to the annual Car Wars report by John Murphy, from Bank of America Merrill Lynch Global Research.
In the report's analysis of automakers' market share from 2013 to 2017, it predicts only small changes among the major companies. Ford and Honda see the biggest positive effect with an estimated 0.5 percent increase in their shares over the next three years; to 16.2 percent and 10.3 percent respectively. On the flip side, European automakers and Nissan are expected to lose 0.2 percent each to fall to 8.3 percent and 7.8 percent each respectively. The rest of the industry is predicted to hold steady as it is now.
The biggest loser in that prediction might be Fiat-Chrysler Automobiles. The report certainly throws a wet blanket on its plan for significant gains in market share. Murphy told The Detroit News that the company's goal was "almost unattainable."

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: