6 Door Ford Truck Diesel-pickup Truck- Six Door on 2040-cars

Auto blog

Hurricane Sandy cost automakers 15,000 vehicles, may have ruined up to 200k

Hurricane Sandy was the largest Atlantic storm in US history, and its total economic impact is just now coming into view. According to Automotive News, Toyota, Chrysler, Nissan and Honda are set to scrap around 15,000 new vehicles ruined by the storm. Nissan alone accounts for about 40 percent of those, with 6,000 Nissan and Infiniti models deeded "un-saleable" due to damage. The company saw 56 dealerships shuttered due to the storm, but 51 of those have since reopened.
Toyota, meanwhile, had some 4,000 vehicles at its Newark port facility, and of those, 3,000 may be scrapped. An additional 825 were dealer inventory when they were ruined. Honda and Acura dealers are reportedly sending 3,440 vehicles to the salvage yard. By comparison, Chrysler weathered the storm fairly well with 825 units destroyed, while Hyundai suffered only 400 lost units and Kia scrapped around 200.
As you may recall, Fisker also suffered some losses, and Automotive News reports the manufacturer saw 320 Karma models damaged beyond repair. Ford and General Motors have yet to come up with estimates, and no automaker has commented on the full cost of replacing the vehicles.

Ford recalls 83k Taurus and crossover models for halfshaft issue

Ford and the National Highway Traffic Safety Administration have issued a recall for some 83,250 vehicles in the US, for an issue with halfshafts. More specifically a "halfshaft retention circlip" might not have been properly installed on affected vehicles, with the result being halfshafts that may move improperly or disengage completely from the linkshaft while driving. The NHTSA release also notes that the issue may occur "without prior warning" which obviously factors in to the timeliness of getting this checked.
Should the halfshaft disengage, a few troubling things could happen. If it occurs while driving, power from the engine will no longer be transmitted to the wheels. And, if the vehicle is parked without the parking brake applied after disengagement of the circlip, vehicles may roll away even if they're transmissions have been placed in "Park."
Affected vehicles are as follows: Ford Edge and Lincoln MKX crossovers from model years 2012 to 2014; Ford Taurus and Lincoln MKS sedans from model years 2013 to 2014; Ford Flex and Lincoln MKT vehicles from model years 2013 to 2014.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.