2001 F350 Dump Truck W/meyers Plow And Buyers Under Tailgate Spreader on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.

What an Atlas-based Ford F-150 might look like

Just ahead of January's Detroit Auto Show, surprising rumors pegged Ford as revealing some sort of F-150 concept, perhaps as a hurried effort to deflate some of the buzz building around General Motors' new Chevrolet Silverado and GMC Sierra twins, which were also making their auto show debut. Those rumblings turned out to be true, as Ford rolled into the Motor City with its Atlas concept (inset, right), touting the truck's bold styling as a precursor to the next-generation F-Series.
The show truck featured all kinds of clever details, including active wheel shutters and a front air dam that raised and lowered to improve aerodynamics while preserving off-road ability. It also had a genuinely snarly face. And it's that pugnacious snout that may well be on its way to production. The good folks at TopSpeed have worked up the plausible-looking artist's rendering above by cross-referencing the Atlas concept with what little has been revealed from recent spy shots. The look is toned-down pretty dramatically from the concept truck, but its Atlas roots are clear, with a massive three-bar grille and bracket-shaped headlamps hiding a next-generation EcoBoost engine. In the rendering, the show truck's deeply contoured hood and roofline have been ditched and larger, more traditional side mirrors have been fitted - all likely concessions in the move to production sheetmetal.
While Ford has yet to officially announce when it will unveil the 2015 F-150, all signs point to next year's Detroit Auto Show - one year after the Atlas shrugged off GM's new pickups.