2015 Ford F250 Lariat on 2040-cars

Auto blog

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

Junkyard Gem: 1991 Mercury Capri

Ford has gotten a lot of use out of the Capri name in the United States. First, there was the Lincoln Capri in the 1950s, followed by the Ford Capri Mk1 (which was sold by Mercury dealers in the USA but never actually badged as a Mercury). Then came the 1979-1986 Mercury Capri, built on the very successful Fox Platform and essentially a clone of the Mustang. Finally, in 1991, the Australian Ford Capri came to the United States. Here is an example of this rare car that I spotted in a Northern California self-service yard not long ago. Mechanically speaking, the 1991-1994 Capri was a Mazda 323 under the skin, complete with a member of the same B-series engine family that went into such cars as the Miata and Ford Escort. So, for a few years in the early 1990s, car shoppers who wanted a sporty Mazda convertible could choose between a Miata and a Capri. The Capri had front-wheel-drive, but could be had with factory turbocharging. These cars were reliable and fun, but had a tough time competing with the Miata in the showroom battles. You'll see the occasional example now and then, but most of the 1991-1994 Capris have met the same fate that awaits this one. Related Video:

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.