2006 Ford F-150 Xlt Crew Cab Pickup 4-door 5.4l on 2040-cars

Auto blog

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.

Ford will add lots of carbon fiber to new vehicles

With BMW receiving a bunch of positive press for its usage of carbon fiber to build its i3 and i8 plug-in vehicles, Ford is jumping into that game as well. The US automaker has reached a manufacturing agreement with Dow Chemical to speed up the use of that material in Blue Oval vehicles. Carbon fiber usage will cut weight from Ford's new products, boosting fuel efficiency as a result. Ford will work with DowAksa, a 50/50 joint venture between Dow Chemical and Turkey-based Aksa Akrilik Kimya Sanayii A.S, on a manufacturing partnership. The goal is to speed up technology research to make it cheaper to make cars and trucks with carbon fiber materials. Ford's light-weighting efforts received a boost of sorts this week when its aluminum-body 2015 F-150 was awarded a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing, making this year's version the safest to date. The new body construction cut 700 pounds from the truck's curb weight. Take a look at Ford's press release about DowAksa below. FORD, DOWAKSA TO JOINTLY DEVELOP CARBON FIBER FOR HIGH-VOLUME AUTOMOTIVE LIGHT-WEIGHTING APPLICATIONS Ford and DowAksa formalize agreement to advance the adoption of cost-effective carbon fiber components through technology validation and proof of concept to reduce vehicle weight and increase fuel efficiency without sacrificing strength Agreement provides pathway for a high-volume manufacturing partnership New joint development agreement accelerates joint research announced in January in partnership under new U.S. composites manufacturing institute Ford and DowAksa today signed a joint development agreement (JDA) to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter for greater fuel efficiency, performance and capability. The agreement, between Ford Motor Company, Ford Global Technologies and DowAksa – a 50/50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya Sanayii A.S – will combine DowAksa's feedstock capacity, carbon fiber conversion and downstream intermediates production capabilities with Ford's expertise in design, engineering and high-volume manufacturing. The goal is to produce materials that make cost-effective carbon fiber composite parts that are much lighter than steel but meet automotive strength requirements.

2015 Ford F-150 claims segment's best payload, towing ratings

While we are set to drive the new, 2015 Ford F-150 in the coming days, there's a big piece of news on the latest-generation of the Blue Oval's bread-and-butter pickup coming out of Dearborn, and it focuses on the truck's hauling and towing abilities.
The new F-150 will have a maximum payload of 3,300-pounds (V8 models), and, perhaps more importantly, a 12,200-pound tow rating (EcoBoost V6 models), which for the first time are compliant with the Society of Automotive Engineer's J2807 standards. Those best-in-class figures are significant feathers in Ford's cap as the Detroit Three continue duking it out for the title of top pickup.
"As founding members of the SAE trailer towing committee, we will meet SAE trailer towing standards," Ford's Aaron Miller told Autoblog.