1959 Ford F100 Truck 292 Motor 3 Speed Manual Tranny on 2040-cars

Auto blog

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.

Ford highlights new F-650 and F-750 with full-size Tonka show truck [w/videos]

Who among us hasn't been tempted by the prospect of buying a big yellow truck and painting the name Tonka along the side? Well apparently there were some folks over at Ford who were just as tempted, only they actually had the means to make that childhood fantasy a reality in the form of the truck you see here. Revealed at the NTEA Work Truck Show this week in Indianapolis, this Tonka show truck stands nearly 10 feet tall. It's painted bright yellow, just like the one you played with in the sand box (and probably still would given the opportunity and maybe no one else looking) and has a blacked-out nose treatment and special graphics. As you can see, it's also equipped with a working dump bed, and has a truly staggering 33,000-pound gross vehicle weight rating, built to showcase the Blue Oval's new line of medium duty trucks. Of course "medium duty" is a relative term, and the new F-750 is clearly a heavier piece of machinery than the company's own Super Duty pickups, but they're lighter-duty than a proper big rig. The new 2016 Ford F-650 and F-750 are just as tough as the models they replace, but they're now quieter and more comfortable to use. In fact, Ford says its 6.7-liter Power Stroke V8 diesel is now 25-percent quieter inside the cabin at highway speeds, 45-percent quieter at idle and 35-percent quieter standing outside in front of the grille. Ford notes that it's the only medium-duty truck manufacturer that makes its own engines and transmissions. That Power Stroke diesel comes with 270 horsepower and 675 pound-feet of torque as standard, but can be upgraded to 300 hp and 700 lb-ft or all the way up to 330 hp and 725 lb-ft. Commercial buyers will also be able to choose between Regular, Super and Crew Cab models with a straight-frame, dock-height or tractor-towing frames, meaning that whatever it is you've got to haul, chances are high that the new Ford F-650 and F-750 can be set up to get the job done.

Which electric cars can charge at a Tesla Supercharger?

The difference between Tesla charging and non-Tesla charging. Electrify America; Tesla Tesla's advantage has long been its charging technology and Supercharger network. Now, more and more automakers are switching to Tesla's charging tech. But there are a few things non-Tesla drivers need to know about charging at a Tesla station. A lot has hit the news cycle in recent months with regard to electric car drivers and where they can and can't plug in. The key factor in all of that? Whether automakers switched to Tesla's charging standard. More car companies are shifting to Tesla's charging tech in the hopes of boosting their customers' confidence in going electric.  Here's what it boils down to: If you currently drive a Tesla, you can keep charging at Tesla charging locations, which use the company's North American Charging Standard (NACS), which has long served it well. The chargers are thinner, more lightweight and easier to wrangle than other brands.  If you currently drive a non-Tesla EV, you have to charge at a non-Tesla charging station like that of Electrify America or EVgo — which use the Combined Charging System (CCS) — unless you stumble upon a Tesla charger already equipped with the Magic Dock adapter. For years, CCS tech dominated EVs from everyone but Tesla.  Starting next year, if you drive a non-Tesla EV (from the automakers that have announced they'll make the switch), you'll be able to charge at all Supercharger locations with an adapter. And by 2025, EVs from some automakers won't even need an adaptor.  Here's how to charge up, depending on which EV you have:  Ford 2021 Ford Mustang Mach-E. Tim Levin/Insider Ford was the earliest traditional automaker to team up with Tesla for its charging tech. Current Ford EV owners — those driving a Ford electric vehicle already fitted with a CCS port — will be able to use a Tesla-developed adapter to access Tesla Superchargers starting in the spring. That means that, if you own a Mustang Mach-E or Ford F-150 Lightning, you will need the adapter in order to use a Tesla station come 2024. But Ford will equip its future EVs with the NACS port starting in 2025 — eliminating the need for any adapter. Owners of new Ford EVs will be able to pull into a Supercharger station and juice up, no problem. General Motors Cadillac Lyriq. Cadillac GM will also allow its EV drivers to plug into Tesla stations.