2002 Ford Explorer Xlt Sport Utility 4-door 4.6l on 2040-cars

Auto blog

Performance CNG wants to crowdfund natural gas-powered Ford Mustang

Soliciting investments to develop a street-legal compressed natural gas (CNG) powered Ford Mustang that can deliver 470 horsepower certainly wouldn't make sense on a site called Indiestopstop. Nope, Indiegogo is the more-appropriately-named site that one Michigan entrepreneur is using to try and crowdfund his CNG 'Stang. He's looking to raise $55,000. Michigan's Daryl Patrishkoff and his company Performance CNG LLC showed off their converted 2003 Mustang last year at the Woodward Dream Cruise in Royal Oak, MI in an effort to get some exposure for the car, which can run on both gas and CNG. The company and its three-man team is looking to further develop the project in the name of a fueling source that is 40 percent cheaper than gasoline, throws off as much as 30 percent fewer tailpipe greenhouse gas emissions and makes the country less dependent on foreign oil. Performance CNG estimates that just 120,000 of the world's 15 million CNG-powered vehicles are in the US and is calling for more. As for the $55 grand, Patrishkoff estimates that more than half of that amount would be committed to the Environmental Protection Agency (EPA) testing of emissions, fuel economy and horsepower. The problem? As of right now, only $150 has been raised. Check out Performance CNG's press release below and see the fundraising effort on Indiegogo here. Eco-Friendly Muscle Car? CNG vehicles save money, emit less pollution and creates jobs from American-mined fuel SHELBY TOWNSHIP, Mich., May 5, 2014 /PRNewswire/ -- Daryl Patrishkoff of Shelby Township, MI, has a vision for the American automotive industry. He firmly believes that our fuel of choice should be Compressed Natural Gas (CNG), not gasoline. Until the full CNG infrastructure is in place a Bi-Fuel vehicle, fueled by either CNG or gasoline upon the drivers command, is the bridge vehicle that can lead this transition. Patrishkoff heads up a (3) man technical team developing this technology. The advantages are: 40 percent savings in fuel costs at the pump 25-30 percent reduction in harmful emissions 100 percent US provided natural gas Meaningful employment for the US economy The most important benefit, however, is that a CNG-powered vehicle runs on fuel that can be mined in America, eliminating the need for foreign oil. "After decades of political rhetoric, these types of vehicles can truly lead the US to energy independence," he said.

2015 Mustang-based Saleen S302 to boast as much as 640 hp

The Ford Mustang is obviously a famous performance vehicle in its own right, but it often works even better as a platform for the aftermarket to upgrade. With the all-new 2015 model just now hitting the scene, the famous tuners at Saleen are getting their improvements for the new pony car ready for the world. After recently teasing it, the specs for its fresh S302 model are officially here, along with a first look at it in profile.
Of course, the biggest question on everyone's mind is how much power the company can get from the Mustang's V8. With the 2015 V8 model rated at 435 horsepower and 400 pound-feet, Saleen expects to bump the Ford factory numbers slightly to 450 hp and 410 lb-ft in naturally aspirated form, or with the benefit of a supercharger, it will rocket the engine's output figures to 640 hp and 565 lb-ft. No matter which powerplant a buyer chooses, there are a wide variety of available final-drive ratios with a six-speed manual or automatic gearbox.
Available as either a coupe or convertible forms, Saleen will offer its S302 in three trim levels - White Label, Yellow Label and Black Label. The White Label is the only naturally aspirated one of the bunch, but it still benefits from upgrades like a new exhaust, limited-slip differential, improved suspension, heat extractor hood and rear wing.

Ford F-150 Raptor gets EcoBoost V6, new chassis and aluminum body [w/videos]

The Autoblog staff universally loves the Ford F-150 SVT Raptor, and the truck's about to get even better. Coming in the fall of 2016 (we'd assume as a 2017 model), the next off-road-ready pickup from Ford will boast an all-new, purpose-built, high-strength steel frame and a lightweight aluminum body that saves more than 500 pounds when compared to the current Raptor. It's six inches wider overall than the regular 2015 F-150, which both makes it look awfully mean but also aids in stability when driving fast off the road, and new LED lighting elements make it stand out when the sun goes dim. Under the Raptor's muscular hood will be a 3.5-liter EcoBoost V6 engine that will make more than the current 6.2-liter V8's 411 horsepower and 434 pound-feet of torque, though we don't have exact power figures for the next-gen Raptor quite yet. Also new will be a 10-speed automatic transmission, which will replace the current six-speed unit and ought to provide appropriate ratios for both rock crawling and high-speed desert trail running. Speaking of high-speed running, what makes the Raptor tick, perhaps more than any other single component, are its custom-designed suspension bits. Redesigned, larger Fox Racing Shocks with more suspension travel and all-new terrain management technology, combined with BFGoodrich All-Terrain KO2 tires, are the bits and pieces that allow for Baja-style off-roading. View 14 Photos The four-wheel-drive system in the next-gen Raptor will include a Terrain Management with settings for Normal driving, Street driving, Weather mode (for rain, snow or ice), Mud and Sand, Baja mode and Rock mode. According to Ford, the Raptor's new transfer case is designed to work as both a locking unit for crawling and a full-time unit for other off-road applications. A Torsen front differential will be optional. Basically, if all of this new stuff turns out to be as good in practice as it sounds in a press release, the next F-150 Raptor will only serve to separate Ford's off-road pickup even further from its half-hearted competitors. Feel free to watch the video and read more down below.