1996 Ford Explorer Xl Sport Utility 4-door 4.0l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Lincoln recycling tree fibers into new MKX armrest

Want to hug a tree, or at least a really small part of one. Then set your arm down on one of those armrests in the 2014 Lincoln MKX crossover. The US automaker is working with Weyerhaeuser and Johnson Controls on a tree-based, cellulose-reinforced polypropylene material used in the component that connects the armrest to the floor console, Wards Auto says. With properties similar to plastic, the tree-based material replaces fiberglass and is about six percent lighter. No big deal for now, but if the material starts getting used for things like battery trays and interior storage covers, that loss in weight may eventually start adding up enough to boost fuel economy a bit, providing a green double bonus. Lincoln parent Ford, which isn't saying how much more (or less?) it costs to use the new material, established its Biomaterials and Plastics Research team in 2001. In 2007, the company began using soy-based foam in car seats used for models such as the Lincoln Navigator and Ford Mustang and has since broadened biomaterials use to components like floormats and cupholder inserts. Ford also used recycled plastic bottles from the 2012 North America International Auto Show for seats in the Focus Electric.

2015 Ford Mustang leaked in Autoweek

We would have to imagine that Ford knew it couldn't keep its 2015 Mustang under wraps for too long, and with only days to go before the pony car's official unveiling, the dam seems to be cracking. SVTPerformance.com member Screamin 40th just posted some images taken of the sixth-gen Mustang prominently featured in and on the cover of the December 9 issue of Autoweek magazine.
These images show that recent renderings we saw weren't too far off. The face is just like what we saw in spy shots a few months back, but the rear of the car features some of its more striking cues. Starting with the pronounced haunches and hidden B-pillars, the rear view of the new Mustang might be its best with the ridged, three-bar taillights, a rear diffuser and the lack of a faux gas cap, which allows the galloping pony to be an even more prominent element against the black trim.
The images also reveal a small portion of the updated interior carrying over retro themes like the deep-dish steering wheel and dual-gauge instrument cluster, but it also adds some modern tech with a big infotainment displays and a clean center stack layout. No official word on powertrain or other specs, but while we can't make out most of the magazine's text, our eyes did catch mentions of an independent rear suspension and a 200-pound weight reduction.