03 Ford Explorer Xlt Premium Leather Seats Super Low Miles Must See Newer Tires on 2040-cars

Auto blog

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

2015 Ford Mustang already under recall, but just 53 units

Ford has issued a small - but significant - recall for one of its spotlight cars: the 2015 Mustang.
The recall affects just 53 cars, with 50 in the United States and three in Canada. Ford said the passenger side safety belt buckle tension sensor may not have been calibrated properly by the supplier. This could lead to "misclassification" of the passenger seat occupant, and could cause the airbag to deploy improperly.
A Ford spokesperson didn't immediately respond to a request for comment. In a statement, the automaker said it is not aware of any accidents or injuries, and dealers will replace the buckle assembly at no cost to customers. The cars affected were built at Flat Rock Assembly Plant in Michigan from Aug. 18 to Oct. 2.

Ford Green Zone works magic with GPS to make your drive smarter, cleaner

For the most part, plug-in hybrids rely on the power stored in the battery until that charge is depleted. Unless the switch can be changed manually, it's only then that the cars fire up the internal combustion engine and begin using the fossil fuels on board. This is ideal, of course, when one's drive isn't long enough that the car needs to start sipping gasoline at all. On longer commutes, when it's certain that the route is longer than the car's all-electric range, this isn't necessarily the most efficient use of energy. Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds. Ford is working on a smart system, based on Nokia mapping technology, that uses GPS data to use both the electricity and conventional fuel more efficiently. Since battery power is less efficient at highway speeds, Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds, rather than just using up all the electrons right at the beginning of the drive. Using a website or the in-car navigation system, the driver can pinpoint the parts of the route, highlighted in green, where using battery power would be more effective, and set the car to automatically switch to electricity for those sections. Depending on the route, the car could automatically switch back and forth between the two power sources multiple times, particularly if the drive is a mix between city and highway driving. Of course, Green Zone will be go beyond that. The program is being developed to take traffic and road grade into account, details that allow the car to be make even smarter choices to improve efficiency. Ford even hopes to have Green Zone learn driver habits, and respond accordingly depending on who is driving the car. The system could control other features as well, such as anticipating corners and shifting the headlights to better illuminate the road ahead. Green Zone could also potentially use information from vehicle-to-vehicle networking to control functions in the car. The Green Zone system still has a few years before it will be ready to be put into production vehicles, but Ford is confident it will make its way onto the road eventually. As with other innovations that improve efficiency and make our vehicles smarter, we can expect to see similar technology from other manufacturers, until it becomes a regular part of driving in the future.