2007 Ford Expedition 4x4 Xlt 5.4 Rebuildable Repairable **sandy Flood** Low Res on 2040-cars

Auto blog

Performance CNG wants to crowdfund natural gas-powered Ford Mustang

Soliciting investments to develop a street-legal compressed natural gas (CNG) powered Ford Mustang that can deliver 470 horsepower certainly wouldn't make sense on a site called Indiestopstop. Nope, Indiegogo is the more-appropriately-named site that one Michigan entrepreneur is using to try and crowdfund his CNG 'Stang. He's looking to raise $55,000. Michigan's Daryl Patrishkoff and his company Performance CNG LLC showed off their converted 2003 Mustang last year at the Woodward Dream Cruise in Royal Oak, MI in an effort to get some exposure for the car, which can run on both gas and CNG. The company and its three-man team is looking to further develop the project in the name of a fueling source that is 40 percent cheaper than gasoline, throws off as much as 30 percent fewer tailpipe greenhouse gas emissions and makes the country less dependent on foreign oil. Performance CNG estimates that just 120,000 of the world's 15 million CNG-powered vehicles are in the US and is calling for more. As for the $55 grand, Patrishkoff estimates that more than half of that amount would be committed to the Environmental Protection Agency (EPA) testing of emissions, fuel economy and horsepower. The problem? As of right now, only $150 has been raised. Check out Performance CNG's press release below and see the fundraising effort on Indiegogo here. Eco-Friendly Muscle Car? CNG vehicles save money, emit less pollution and creates jobs from American-mined fuel SHELBY TOWNSHIP, Mich., May 5, 2014 /PRNewswire/ -- Daryl Patrishkoff of Shelby Township, MI, has a vision for the American automotive industry. He firmly believes that our fuel of choice should be Compressed Natural Gas (CNG), not gasoline. Until the full CNG infrastructure is in place a Bi-Fuel vehicle, fueled by either CNG or gasoline upon the drivers command, is the bridge vehicle that can lead this transition. Patrishkoff heads up a (3) man technical team developing this technology. The advantages are: 40 percent savings in fuel costs at the pump 25-30 percent reduction in harmful emissions 100 percent US provided natural gas Meaningful employment for the US economy The most important benefit, however, is that a CNG-powered vehicle runs on fuel that can be mined in America, eliminating the need for foreign oil. "After decades of political rhetoric, these types of vehicles can truly lead the US to energy independence," he said.

Ford announces free brake pad offer if customers stop by dealers

These days, when you buy a new car, it's not unreasonable to expect a certain period of free maintenance to come along as well. Sometimes this is through the life of the warranty, in other cases a little less. But Ford Motor Company is going beyond those deals for at least one part of its cars. As of now, if you buy a set of Motorcraft brake pads for a Ford, Lincoln or Mercury model, you get free replacements for as long as you own the vehicle. The offer is good at Ford or Lincoln dealers and Quick Lane Tire & Auto Centers.
"We will replace the pads for as long as you own the vehicle," said Elizabeth Weigandt to Autoblog. She did clarify that the Motorcraft pads are generally for models from the '90s or newer. Also, to take advantage of this program, a person must return to the same dealer each time to get the free parts.
Of course, Ford isn't just handing out brake pads to anyone who walks by; there are certain stipulations. First, the components have to be worn down to less than three millimeters to be eligible, and the buyer still has to pay for the labor to install them. If the model is used as a fleet vehicle for commercial purposes like as a taxi or limousine, this offer also doesn't apply; the same thing for racecars. On the plus side, if you recently bought a set of pads from one of the participating locations, you're still in luck. The deal covers parts purchased as of July 1.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.