2004 Ford Expedition Xlt Sport Sport Utility 4-door 5.4l on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

MotorWeek relives '80s coupes with Dodge Daytona, Ford Escort EXP

Get ready for a wave of nostalgia and the rapid realization of the huge progress in performance cars over the last 30 years. For its latest Retro Review, MotorWeek takes a look back at two, front-wheel drive coupes from the '80s that seem to have entirely vanished from the roads today. Both the 1986 Dodge Daytona CS and the 1986.5 Ford Escort EXP were considered affordable, sporty options in their day, but the passage of time hasn't been kind to either of their specs. The Daytona certainly looks the part of a performance machine with a body that's reminiscent of other '80s coupes, like the third-gen Chevrolet Camaro. However with 146 horsepower and 170 pound-feet of torque from a 2.2-liter turbocharged four-cylinder, acceleration wasn't exactly a strong suit. MotorWeek complained about copious torque steer, as well. The optional CS suspension upgrade package on this Daytona was apparently a nod to Carroll Shelby who was working with Dodge at the time. If anything, the Escort EXP withstands the test of time even worse. As a two-seat coupe, you might have expected Ford's engineers to really turn up the performance to fit the sporty image that the exterior conveyed. That didn't really happen, and depending on which model buyers ordered, they got either 86 horsepower with a 1.9-liter engine or the "high-output" version of that mill with 108 hp.

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.