2005 Ford Excursion Xlt Diesel 4x4 on 2040-cars

Auto blog

Ford recalls 2020-21 Explorer and Lincoln Aviator, 2021 E-Series

Ford announced safety recalls for the 2020-2021 Explorer and Lincoln Aviator along with the 2021 E-Series early Monday. The recalls address entirely different issues.  In the case of the 2020-2021 Ford Explorer and Lincoln Aviator, that issue is motor mount hardware. Specifically, the fasteners that secure the passenger-side motor mount may back out. In Ford's words, this can result in a "loss of power," which is the entirely predictable result of an engine parting ways with the vehicle it powers.  As alarming as that may sound, owners should not have to worry about anything extreme, as the passenger side mount is only one of multiple, and Ford says it is not aware of any incidents that have occurred with vehicles in customer hands. Ford says it impacts only about 1400 examples of the Explorer and Aviator in the States (plus two in Mexico and 65 in Canada) that were built at Chicago Assembly Plant between July 28 and 30, 2020. Ford is in the process of alerting its owners to the recall, and those with affected models will have their mount hardware replaced by their local Ford dealerships free of charge.  The 2021 E-Series is being recalled for a potential heat management issue resulting from improperly aligned thermal insulation on the underside of its engine cover. In vehicles where this insulation was not properly installed so that it reaches all the way to the edges of the cover, the resulting heat bleed can cause high in-cabin surface temperatures, and direct contact them could result in burns.  This is the larger of the two recalls, as Ford says it covers nearly 33,000 examples sold in the United States and Canada. Fortunately, as with the above issue, Ford says it has not been made aware of any customer incidents. Ford says the remedy is a set of insulation patches for the exposed areas.  Related Video:

J.D. Power study identifies top seats for your tush

File under News your fanny can use: The seating systems in the Ford Escape and Edge, the Audi A3, Chevrolet Cruze, Kia Cadenza, Porsche Cayenne and Toyota Tundra received top marks in a new J.D. Power study on seating and seat belt quality and satisfaction. The J.D. Power 2017 Seat Quality and Satisfaction Study asked more than 77,000 new owners and lessees of 2017 model-year cars and light trucks to rate their vehicle's seats and seat belts within the first 90 days of taking ownership. The survey is broken up into seven vehicle segments and scored on total seat problems per 100 within each segment, with awards presented to the seating system supplier. Canadian auto supplier Magna won three of seven first-place awards for its seating systems in the A3, Escape and Edge. Ireland-based Adient got top marks for its seats in the Cadenza and Cayenne. Lear Corp. won for the Cruze, and Avanzar Interior Technologies scored highest for seats in the Tundra. J.D. Power says its study is intended for automakers and suppliers with quality and satisfaction information to be used in developing and marketing seating systems. "But the results are just as interesting to a consumer audience," the company says. "After all, some drivers spend a considerable amount of time behind the wheel, and it's helpful to know which vehicles offer the most comfortable seats for those long commutes." Ain't that the truth. Ford was the only automaker whose seat systems, both manufactured by Magna, received top honors in two segments: the Escape for mass-market compact SUV and the Edge for mass-market midsize/large SUV. J.D. Power says it used 22 attributes to measure seat quality, three measures of seat belt quality and 12 to measure satisfaction. Awards were presented to the seating suppliers. Related Video: Image Credit: Audi Auto News Design/Style Audi Chevrolet Ford Kia Porsche Toyota Safety JD Power seats

Recharge Wrap-up: Ford 1.0L EcoBoost a hit in Europe; Build a tiny inverter, win $1 million

In Europe, Ford's 1.0-liter EcoBoost engine is the best-selling turbocharged gasoline engine. The three-cylinder motor powers 20 percent of new Fords sold in Europe. Earlier this year, it won its third International Engine of the Year award, and between January and June, it was sold in about 120,000 cars. So far this year, 38 percent of Fords sold in the Netherlands, 35 percent in Denmark and 32 percent in Switzerland have been powered by the 1.0-liter EcoBoost. The engine's turbocharger spins at 248,000 rpm, and provides 24 psi of pressure. The engine produces up to 138 horsepower, depending on the version. Read more in the press release below. When lithium-ion battery packs are retired from the road, remanufacturing, repurposing, and recycling are worthwhile options, according to a study by Mineta Transportation Institute. The study included a cost-benefit analysis of those three options, and found remanufacturing to be the best route. To get the most out of them, batteries should be tested and have their damaged cells replaced then put back to use. Repurposing is the second best option, using the remaining available charge for something besides cars. Recycling on its own isn't profitable, but it could make economic sense with "increased technological breakthroughs." Learn more at Recycling International or download the report here. A smaller inverter for EVs can win you $1 million. The Little Box Challenge is an open competition to build a power inverter with a density of at least 50 watts per cubic inch. Google and the Institute of Electrical and Electronics Engineers (IEEE) are offering the hefty prize to the team that builds the inverter with the highest power density within an enclosed volume of 40 cubic inches. Teams must register by September 30. Read more at Green Car Congress or learn more at the Little Box Challenge website.