2014 Ford Escape Se on 2040-cars

Auto blog

Ford fixing 130k vehicles in three recalls

Ford is issuing three new safety campaigns that cover a total of 130,801 vehicles in North America, but the company has no reports of accidents, injuries, or fires from any of these issues. The largest of these campaigns covers 128,823 examples of the 2009-2010 Ford Edge and Lincoln MKX that are currently registered or originally sold in rust-prone areas of North America, including 110,636 in the US. On these crossovers, "corrosion under the reinforcement brackets where the fuel tank is mounted" can potentially result in a fuel leak. To fix the issue, dealers will inspect the tank and will repair or replace it as necessary. The affected locations are: Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin; and the Canadian provinces of New Brunswick, Newfoundland and Labrador, Nova Scotia, Ontario, Prince Edward Island, and Quebec. Ford is also recalling 1,906 North American examples of the 2016 Mustang, including 1,900 in the US, because of possible damage to some components during shipping to the factory. On the affected pony cars, "dealers will replace front and rear seat belt assemblies, rear seat buckle assemblies, and child tethers," the company says in its statement. Finally, the smallest campaign is for 72 units of the 2016 Ford E-Series cutaway and chassis cab in North America, including 65 in the US. On these, the trailer brakes don't activate when pressing the brake pedal, and dealers need to update the powertrain control module software. Related Video: FORD ISSUES TWO SAFETY RECALLS AND ONE SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., Oct. 28, 2015 – Ford Motor Company is issuing two safety recalls and one safety compliance recall in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford Motor Company issues safety recall for certain 2009-2010 Ford Edge and Lincoln MKX vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 129,000 2009-2010 Ford Edge and Lincoln MKX vehicles in corrosion states and provinces in North America for possible corrosion under the reinforcement brackets where the fuel tank is mounted to the vehicle.

Would a Mustang-based Lincoln look like this?

Designer Josiah LaCalla has taken a stab at what a Ford Mustang-based Lincoln model might look like with the Continental Mark X1 concept. Make no mistake, Ford's luxury arm has made it abundantly clear that it won't be pursuing any new products outside of volume models, which means a flashy halo grand tourer like the one you see here isn't in the cards. LaColla used the Mercedes-Benz SLS AMG as a basis for his creation, which explains the long nose, but we certainly don't mind the idea of a rear-wheel drive Lincoln with a cabin pushed to the aft.
While we're dreaming, there's certainly nothing stopping us from imagining what's under that lengthy hood. We like the idea of the 5.8-liter supercharged V8 from the Shelby GT500 pushing the Mark X1 down the road, but how about something a little more inventive? Something like a high-revving, buttery V12 with enough torque to push the contraption well past 200 miles per hour. Dream a little dream, people.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: