2012 Ford Escape Xlt Sport Utility 4-door 3.0l on 2040-cars

Auto blog

Ford recalls over 953,000 vehicles to replace Takata airbag inflators

DETROIT — Ford is recalling more than 953,000 vehicles worldwide to replace Takata passenger airbag inflators that can explode and hurl shrapnel. The move includes over 782,000 vehicles in the U.S. and is part of the largest series of recalls in U.S. history. Included are the 2010 Ford Edge and Lincoln MKX, the 2010 and 2011 Ford Ranger, the 2010 to 2012 Ford Fusion and Lincoln MKZ, the 2010 and 2011 Mercury Milan, and the 2010 to 2014 Ford Mustang. Some of the recalls may be limited to specific geographic areas of the U.S. Takata used the chemical ammonium nitrate to create an explosion to inflate airbags. But it can deteriorate over time due to heat and humidity and explode with too much force, blowing apart a metal canister designed to contain the explosion. At least 23 people have been killed worldwide and hundreds injured by the inflators. Ford says it doesn't know of any injuries in vehicles included in this recall. Dealers will replace the inflators. Ford will notify owners about the recall starting on Feb. 18, and the company has replacement parts available for dealers to order, said spokeswoman Monique Brentley. In previous Takata recalls, parts availability had been an issue. Owners can go to this Ford website and key in their vehicle identification number to see if their cars and SUVs are being recalled. The same information will be available soon at the NHTSA recall website. More than three years after the U.S. National Highway Traffic Safety Administration took over management of recalls involving Takata inflators, one third of the recalled inflators still have not been replaced, according to an annual report from the government and a court-appointed monitor. The report says 16.7 million faulty inflators out of 50 million under recall have yet to be replaced. And 10 million more inflators are scheduled to be recalled this month, including the Ford vehicles. Safety advocates said the completion rate should be far higher given the danger associated with the inflators. The recalls forced Takata of Japan to seek bankruptcy protection and sell most of its assets to pay for the fixes. The inflators grow more dangerous as they get older because ammonium nitrate deteriorates due to high humidity and cycles from hot temperatures to cold. The most dangerous inflators are in areas of the South along the Gulf of Mexico that have high humidity. Related Video:

2016 Ford Focus RS shows up in Geneva, still bound for America [w/video]

Representing the super-hot hatchback movement at the 2015 Geneva Motor Show, we have the 2015 Ford Focus RS, the third-generation to wear the performance-focused designation. Bound for America for the first time, it's fair to say we're darn excited for the Focus RS and its 2.3-liter, turbocharged four-cylinder. With at least 315 horsepower under the hood and the long-awaited inclusion of an all-wheel-drive system, there's little arguing that the RS will be seriously quick off the line. It should be darn good through the bends, too. The all-wheel-drive system packs a Dynamic Torque Vectoring Control system that sends up to 70 percent of the power to the rear axle. On top of the AWD's torque vectoring ability, the Focus RS adds a brake-based torque vectoring system, which transfers power laterally, as needed. Michelin Pilot Sport Cup 2 tires should only help keep the RS glued to the tarmac. A three-pedal setup is the sole transmission option, which should delight purists. According to Ford, both the clutch and the trans itself have been bolstered to handle the 2.3-liter's power. Ford also comprehensively upgraded the looks of the Focus RS relative to the lesser Focus ST. Its enormous rear wing and the back bumper's rear diffuser complement the car's menacing face. The ST's center-exit exhaust has been ditched for a meaty set of pipes, while the car on display in Geneva shows off a different set of alloys than what we saw during the car's original debut. Check out our full gallery of live photos of this hot Ford, available up top. And be sure to check out our Short Cut of the new hot hatch by scrolling down. All-New Ford Focus RS; High-Performance Hatch with Innovative All-Wheel Drive Set for U.S. Debut - Third-generation Ford Focus RS will be available in major markets around the world and for the first time in the United States; Focus RS follows the reveal last month of the new Ford GT supercar – a new era of Ford performance that will deliver 12 new vehicles by 2020 - All-new Ford Performance All-Wheel Drive with Dynamic Torque Vectoring Control paired with a powerful 2.3-liter EcoBoost® four-cylinder engine will provide impressive performance - Aggressive, functional design inside and out makes Focus RS the most powerful production Focus ever, with highly capable performance on both road and track - Professional rally driver and star of Gymkhana films Ken Block teamed with Ford as a consultant on development of Focus RS Cologne, Germany, Feb.

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.