2010 Ford Escape Xlt on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.

2015 Ford Mustang leaked in Autoweek

We would have to imagine that Ford knew it couldn't keep its 2015 Mustang under wraps for too long, and with only days to go before the pony car's official unveiling, the dam seems to be cracking. SVTPerformance.com member Screamin 40th just posted some images taken of the sixth-gen Mustang prominently featured in and on the cover of the December 9 issue of Autoweek magazine.
These images show that recent renderings we saw weren't too far off. The face is just like what we saw in spy shots a few months back, but the rear of the car features some of its more striking cues. Starting with the pronounced haunches and hidden B-pillars, the rear view of the new Mustang might be its best with the ridged, three-bar taillights, a rear diffuser and the lack of a faux gas cap, which allows the galloping pony to be an even more prominent element against the black trim.
The images also reveal a small portion of the updated interior carrying over retro themes like the deep-dish steering wheel and dual-gauge instrument cluster, but it also adds some modern tech with a big infotainment displays and a clean center stack layout. No official word on powertrain or other specs, but while we can't make out most of the magazine's text, our eyes did catch mentions of an independent rear suspension and a 200-pound weight reduction.