2010 Econoline Wagon Wheelchair Lift, 49,886 Miles We Have 7 Other Vans On Ebay on 2040-cars

Auto blog

Junkyard Gem: 1991 Mercury Grand Marquis LS

Ford's now-defunct Mercury Division first began using the Marquis name in 1967, on a sporty full-size hardtop based on the Ford LTD, then began offering the Grand Marquis beginning in the 1979 model year. These big, boxy luxury sedans were replaced by big, curvy luxury sedans (on the same platform) starting with the 1992 model year, so today's Junkyard Gem is one of the very last squared-off Grand Marquises ever built. The 1991 Grand Marquis (or "Grandma Keith," as many refer to it today) looks nearly identical to its 1979 predecessor at a glance, just as the 2011 model doesn't differ much from the 1992 model. Ford saw no reason to follow short-lived fashion trends with its simple, sturdy rear-wheel-drive sedan. Only two Grand Marquis trim levels were available for 1991: the base GS and the (somewhat) upscale LS. The former listed at $18,741 and the latter at $19,241, which comes to about $41,494 and $42,601, respectively, in inflated 2022 dollars). This interior would have seemed comfortingly familiar to a 1968 (or even 1958) Mercury owner time-traveling to 1991.  This is the optional "full grain leather seating surface," which cost an extra $489 (about $1,083 today). Dig those opera lights! Air conditioning was standard equipment in the 1991 Grand Marquis and its wagon counterpart, the Colony Park. The engine is the good old pushrod 5.0-liter Windsor V8, which would be replaced by a far more modern 4.6-liter SOHC mill in the '92 Grand Marquis. This engine was rated at 180 horsepower. A four-speed automatic was the only transmission available. The early 1990s ended up being the last gasp for padded vinyl roofs being considered mainstream equipment on new Detroit cars; this one was called the "Formal Coach" roof and cost an additional 725 bucks ($1,605 now). Such roofs were still available on a few cars later in the decade, but their time had passed. Why would such a clean Grandma Keith end up in a place like this? That's easy: it got T-boned directly into the right front wheel, mangling the body and bending up the suspension. This damage might have been worth fixing when the car was five years old, but it's a write-off when it happens to a 31-year-old Ford Panther. 1991 Mercury Grand Marquis Commercial - Savings Ad The granddaddy of them all, and on sale in South Texas! Related video: 2008 Mercury Mariner Hybrid test drive Autoblog

Ford wants to double hybrid offerings by 2020

The Blue Oval is looking for folks on the other side of this Big Old Sphere to get on board with its hybrid offerings. Ford executive Raj Nair, speaking at the Detroit Auto Show this week, said the US automaker wants to double the number of hybrids models it offers by the end of the decade, Reuters reports. Details of what that actually means is anyone's guess, as it was unclear how many of those models would be in the US and how many would be overseas. That said, Nair did say that prospective customers in regions such as China and Europe would drive the expansion of offerings. Ford got off to a great start in the US last year on its hybrid sales, but then tailed off towards the end of 2013. Ford more than doubled its green-car sales in 2013 to almost 88,000 units. In that number were more than 37,000 Fusion Hybrids and more than 28,000 C-Max Hybrids sold domestically. The company also sold almost 7,500 Lincoln MKZ Hybrids. Ford's green-car totals for 2013 were up fivefold at the mid-year point, hinting that Ford's hybrid sales plateaued, at least temporarily, in recent months.

Experts wonder if aluminum F-150 gives Ford a real advantage

There's no doubt that Ford is taking a risk in producing the body of its upcoming new F-150 pickup truck in aluminum. What is up for debate, however, is whether aluminum was a wise risk to take in the first place. Wards Auto took the opportunity to poll some experts on the subject of aluminum versus steel in the automotive sector, with somewhat unsurprising results.
Richard Schultz, a project consultant at Ducker Worldwide, which bills itself as "a leading aluminum industry consultant (though they also deal in steels), suggests that the potential drawbacks to aluminum - higher costs, lower supply - aren't really impediments to the auto industry's increased acceptance of the lightweight metal.
Similarly, Randall Scheps, global automotive marketing director for Alcoa, a massive aluminum producer, counters claims that aluminum is less safe for vehicle occupants, suggesting that the use of aluminum can actually increase safety as it could potentially allow for larger vehicles with more crush space than steel.