2006 Ford E350 11ft Box Truck Aerocell 6.0l Powerstroke Diesel Cloth Ac 2 Door on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

NHTSA opens investigation into Ford Explorer PI brakes

This year more than most, it's pleasant when we can string together a few days without word of an automaker or the National Highway Traffic Safety Administration announcing a bunch of new recalls. It's seemingly been a little quiet on this front lately (barring a spider-related Suzuki issue revealed early today), but now we have word of the government safety agency opening a Preliminary Evaluation into the 2013 Ford Explorer Police Interceptor, a probe that could potentially affect an estimated 20,000 vehicles.
The issue being investigated concerns failures of the front brake hose on the vehicle that show "small splits in the hoses near the body side ferrule of the hose assembly," according to the agency, and the issue could result in longer stopping distances. The feds have reports of 13 malfunctions affecting 11 Explorer units. However, it's important to note that all of the incidents come from a single, unnamed metropolitan police fleet that operates 46 of them. According to The Detroit News, the failures generally took place between December and July.
NHTSA is investigating further to find if this is a more widespread issue than just this one fleet. Ford spokesperson Kelli Felker confirmed to us, "We are cooperating with NHTSA on this investigation, as we always do." Scroll down to read the agency's report.

Ford Mustang GT350R adds a lot more than just a new letter [w/videos]

Okay Chevrolet, the ball is in your court. Ford served up one hell of a rebuttal to the track-focused Camaro Z/28, introducing the limited-production Mustang GT350R, complete with over 500 horsepower, over 400 pound-feet of torque and freaking carbon-fiber wheels. Carbon-fiber wheels. Seriously. It's because of those 19-inch hoops, along with some other changes, that Ford was able to slice 130 pounds from the already lightweight GT350 Track Pack. The wheels are responsible for a 13-pound reduction in unsprung weight per corner, while the removal of such superfluous things like the air conditioning, stereo, rear seats, trunk carpet, backup camera and tire inflator accounts for the rest of the weight reduction. Along with the lower weight, Ford has thoroughly reworked the GT350's aerodynamics, adding a simply monstrous rear wing and diffuser, along with vented wheel wells, a new hood vent that both extracts heat and reduces lift. Beside the aero aids, Ford has shod the carbon-fiber wheels in ultra-grippy Michelin Pilot Sport Cup 2 tires, just to guarantee the shiny side remains up. View 21 Photos Ford retained the standard GT350's 5.2-liter, flat-pane V8, Torsen limited-slip differential (complete with a 3.73 rear axle ratio), although as power figures haven't been published for the standard car, there's no way to know whether the GT350R received a power bump. What we do know, though, is that the GT350R will not be limited to the track. While that's certainly its natural habitat, owners will be able to register and drive this monster on public roads. Take a look at the official press release on the GT350R, available below. And also be sure to have a peek at both Ford's stock photos of the new car, as well as our full gallery of live images, direct from the Blue Oval's Detroit Auto Show press conference home at Joe Louis Arena. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.