2001 Ford Econoline E-350 15 Passenger Van on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ring Brothers shows 1965-66 Mustang fastback carbon fiber body

We covered one of Ring Brothers' more extreme SEMA builds yesterday, the De Tomaso Pantera-based ADRNLN, but if that well-executed but over-the-top Italian-American exotic is too much for you, then perhaps this Ring Brothers 1965 Ford Mustang fastback with a carbon-fiber body suits your tastes better.
What the performance-parts manufacturer is showcasing with the Mustang is the carbon-fiber body itself, which is fashioned around the 1965-66 fastback. It can be bought from the company and bonded to the skin and unibody as a do-it-yourself project, or you can take your Mustang to Ring Brothers and have the body installed there. The fenders, doors and quarter panels are two-inches wider than stock, and Ring Brothers offers a custom widebody chassis to those who want the complete package.
The show car looks sharp in person lowered on HRE wheels, and we appreciate the bare front end so we can see the supercharged V8 and front coilover suspension, though the details on those performance upgrades are slim. Also note the custom independent rear suspension setup at the rear.

Hennessey unleashes 2015 HPE700 supercharged Ford Mustang

Thanks to the 2015 Dodge Challenger SRT Hellcat there is a new magic number in the muscle car world - 707. To raise eyebrows these days in the power war, a vehicle needs to match or preferably exceed that palindromic figure. The tuners over at Hennessey took a look at it for their 2015 HPE700 Mustang and decided to go one better. Well, ten actually, because they bestowed their latest creation with 717 horsepower and 632 pound-feet of torque.
The HPE 700 Mustang takes the standard Mustang GT with its 5.0-liter V8 and turns up the power a few hundred notches with a Roots-type supercharger running at 7.25 psi. Hennessey claims that this boosted 'Stang can rocket to 60 miles per hour in about 3.6 seconds and cover the quarter-mile in 11.2 seconds at 131 mph. For those keeping score at home, those figures are very similar to Challenger Hellcat.
To cope with all of the added boost, the engine gets a high-flow throttle body, upgraded injectors, new fuel pump, stainless steel exhaust and Hennessey's calibration for the engine management. Pricing for the package is $59,500, including the base 2015 Mustang GT, but the company is limiting production to 500 units for the 2015 model year. Founder John Hennessey told Autoblog that he has already received about a dozen orders for them.