2000 Ford Crown Victoria Lx Sedan 4-door 4.6l on 2040-cars
Rome, Georgia, United States
|
Large V8-powered sedans made a comeback in the 21st century, but the Ford Crown Victoria was one of the very few full-size, rear-drive sedans that never left. The "Crown Vic" moniker goes back several decades to when Ford adopted the name for a high-line trim level on the full-size LTD sedan, as baby boomers and their elders no doubt recall. The LTD name was dropped in 1992. The Crown Vic's model run continued uninterrupted until 2007, the last year it was available for consumer purchase. However, it is still produced for fleet use by law enforcement and other agencies. Unlike its more modern competition, the throwback Ford Crown Victoria uses stout but heavy body-on-frame construction and a solid rear axle. The ride and handling envelope suffered somewhat as a result, but it is a durable and cost-effective approach -- which, no doubt, is why it's so popular with cab companies, police departments and fleet operators. For the car's most recent redesign in 2003, Ford fitted it with an all-new frame, a redesigned front suspension and rack-and-pinion steering, all of which improved the big Vic's crash performance and handling dynamics. But, equipped like a Police Interceptor or not, it still couldn't match the agility and overall refinement of its American and Japanese peers, which feature modern unibody designs with fully independent suspensions. Last produced for civilian use for the 2007 model year, the Ford Crown Victoria was a full-size, six-passenger sedan available in base and LX trim levels. The LX model had a few extra upscale features and also allowed access to a couple optional packages such as the premium handling and performance package (previously known as the LX Sport trim level). Despite its 2-ton curb weight, the Crown Victoria was reasonably quick thanks to a 4.6-liter V8 engine with 224 horsepower and 272 pound-feet of torque; LX models equipped with the upgraded performance package were a bit swifter, with 239 horses and 287 lb-ft of torque. A four-speed automatic was the only transmission available, although Crown Vics equipped with the sport package also had an upgraded torque converter and shorter rear-axle gearing that made for quicker initial acceleration off the line. Inside, the dated design and budget materials quality were immediately apparent. The vehicle's strengths were reflected in its solid value for the money and the roomy, comfortable accommodations for five or six. This included a huge 21-cubic-foot trunk that could easily swallow a week's worth of luggage for four adults or a family. |
Ford Crown Victoria for Sale
2009 ford crown victoria police interceptor sedan 4-door 4.6l
1955 ford crown victoria ps pb restored gorgeous wow
2007 ford crown victoria police interceptor pckg- upstate cruisers in great cond(US $5,500.00)
Nice clean administrator vehicle with 240 low hours!!!(US $7,300.00)
1956 ford crown victoria
2001 ford crown victoria - cng(US $4,000.00)
Auto Services in Georgia
Young`s Upholstery & Seat Covers ★★★★★
Vic Williams Tire & Auto ★★★★★
United Auto Care ★★★★★
Unique Auto App ★★★★★
Ultimate Benz Service Center ★★★★★
Transmission For Less.Com ★★★★★
Auto blog
Ford launches pair of recalls affecting fullsize sedans and Transit Connect van
Wed, Jan 28 2015Ford has announced a pair of pretty significant recalls affecting the 2010-2013 Ford Taurus and Police Interceptor, as well as their platform-mate, the Lincoln MKS. A separate recall covers the 2014 Transit Connect. The fullsize sedans include 205,000 vehicles built at Chicago Assembly over a variety of timeframes, ranging between December 1, 2009 and November 30, 2012. The vehicles, 194,889 of which were sold in the United States, have an issue with the spring controls on the interior door handles that could cause the door to open in a side-impact crash. The Transit Connect recall, meanwhile, includes 16,100 vans built between November 6, 2013 and September 20,2014 at the company's Valencia, Spain factory. In these vehicles, the seatbelt fasteners may not have been tightened properly, which could cause them to loosen over time, a condition that's obviously bad news in the event of a crash. Ford says it is not aware of any accidents, injuries or crashes in either recall. Owners will, of course, be notified and asked to report in for inspections and if necessary, free replacements. Scroll down for the full press release from Ford, which includes the complete breakdown of dates during which the affected sedans were built in Chicago. JAN 28, 2015 | DEARBORN, MICH. FORD ISSUES TWO SAFETY RECALLS Ford is issuing two safety recalls. No accidents or injuries are attributed to either of these conditions. Details are as follows: Ford issues safety recall for certain 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans for interior door handle issue Ford is issuing a safety recall for approximately 205,000 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans due to an issue with the spring that controls the interior door handles. If the spring is unseated, the door may become unlatched in a side-impact crash, increasing the risk of injury. Ford is not aware of any accidents or injuries related to this condition. Affected vehicles include certain 2010-2013 Ford Taurus vehicles built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant; certain 2010-2013 Lincoln MKS vehicles built June 2, 2011 to Oct. 31, 2011 at Chicago Assembly Plant; and certain 2010-2013 Ford Police Interceptor sedans built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant.
180,000 new vehicles are sitting, derailed by lack of transport trains
Wed, 21 May 2014If you're planning on buying a new car in the next month or so, you might want to pick from what's on the lot, because there could be a long wait for new vehicles from the factory. Locomotives continue to be in short supply in North America, and that's causing major delays for automakers trying to move assembled cars.
According to The Detroit News, there are about 180,000 new vehicles waiting to be transported by rail in North America at the moment. In a normal year, it would be about 69,000. The complications have been industry-wide. Toyota, General Motors, Honda and Ford all reported experiencing some delays, and Chrysler recently had hundreds of minivans sitting on the Detroit waterfront waiting to be shipped out.
The problem is twofold for automakers. First, the fracking boom in the Bakken oil field in the Plains and Canada is monopolizing many locomotives. Second, the long, harsh winter is still causing major delays in freight train travel. The bad weather forced trains to slow down and carry less weight, which caused a backup of goods to transport. The auto companies resorted to moving some vehicles by truck, which was a less efficient but necessary option.
Ring Brothers shows 1965-66 Mustang fastback carbon fiber body
Thu, 07 Nov 2013We covered one of Ring Brothers' more extreme SEMA builds yesterday, the De Tomaso Pantera-based ADRNLN, but if that well-executed but over-the-top Italian-American exotic is too much for you, then perhaps this Ring Brothers 1965 Ford Mustang fastback with a carbon-fiber body suits your tastes better.
What the performance-parts manufacturer is showcasing with the Mustang is the carbon-fiber body itself, which is fashioned around the 1965-66 fastback. It can be bought from the company and bonded to the skin and unibody as a do-it-yourself project, or you can take your Mustang to Ring Brothers and have the body installed there. The fenders, doors and quarter panels are two-inches wider than stock, and Ring Brothers offers a custom widebody chassis to those who want the complete package.
The show car looks sharp in person lowered on HRE wheels, and we appreciate the bare front end so we can see the supercharged V8 and front coilover suspension, though the details on those performance upgrades are slim. Also note the custom independent rear suspension setup at the rear.