Find or Sell Used Cars, Trucks, and SUVs in USA

1972 Early Bronco Roadster Project on 2040-cars

US $12,500.00
Year:1972 Mileage:10
Location:

Mount Ulla, North Carolina, United States

Mount Ulla, North Carolina, United States
Advertising:
Engine:v8
Vehicle Title:Clear
Condition:
Used: A vehicle is considered used if it has been registered and issued a title. Used vehicles have had at least one previous owner. The condition of the exterior, interior and engine can vary depending on the vehicle's history. See the seller's listing for full details and description of any imperfections. ...
Year
: 1972
Make: Ford
Drive Type: auto
Model: Bronco
Mileage: 10
Trim: black

I am selling my 1972 Ford Bronco project. this is an extremely good start to one of the coolest roadsters on the planet. I have been working on this project for the last 7 years. the following is what is curently completed on the project. The pictures shown are an assortment of pictures during the build to this point the ones with the brown hood on and the floors complete are what it looks like at the present time.

The frame was set on a frame bench and custom built for this project. It has a Fat man fabrications mustang II front suspension with solid stainless control arms and air ride tech. billet air suspension with large two piston Wilwood disc brakes. the rear suspension is Fat man four link with narrowed 9 inch. center section included but no brakes yet.

The drive train is 2004 Mustang GT out of a doner car with 53k miles 4.6, automatic. (installed only not running yet)


The body has been completly rebuilt, quaters are uncut from Arizona, doors are solid and front fenders are aftermarket. windshield post has been cut 3 inches. Sheet metal work is 90% complete , I had the fire wall and floors completed by a local Nascar Fab shop (they look fantastic).  Just going to need some inner fenders once steering and master cylinder have been installed. the floors and fire wall are all custom built to fit , the tail gate is welded solid . wheels are new as well as the Nitto Tires (2k alone).

I will only consider serious buyers, I am not looking to trade anything I have over 20 k in this right now. finished right it should bring close to 80k easily.

Do not ask how much it would take to make it a 4x4 again or how hard it would be to put a top back on it.I will assume you do not have the same vision for it that I have and that you are not a serious buyer.

I do have a clean title for this truck

for further information feel free to email me or even Give me a call (Doug 704-677-0980) so I can give you a better understanding for what you would be getting for your investment.

Auto Services in North Carolina

Window Genie ★★★★★

Auto Repair & Service, Window Tinting, Pressure Washing Equipment & Services
Address: 5300 Atlantic Ave, Raleigh
Phone: (919) 745-8048

West Lee St Tire And Automotive Service Center Inc ★★★★★

Auto Repair & Service
Address: 1100 W Lee St, Oak-Ridge
Phone: (336) 272-8616

Upstate Auto and Truck Repair ★★★★★

Auto Repair & Service, Automobile Diagnostic Service
Address: 2040 Victory Trail Rd, Earl
Phone: (864) 487-9272

United Transmissions Inc ★★★★★

Auto Repair & Service, Auto Transmission, Towing
Address: 2615 Battleground Ave, Summerfield
Phone: (336) 288-3317

Total Collision Repair Inc ★★★★★

Automobile Body Repairing & Painting
Address: 413 Chatham St, Mamers
Phone: (919) 774-7509

Supreme Lube & Svc Ctr ★★★★★

Auto Repair & Service, Auto Oil & Lube, Automobile Inspection Stations & Services
Address: 13715 Nc 50 Hwy N, Benson
Phone: (919) 207-0085

Auto blog

Ford recalls 382k vehicles across six campaigns

Wed, Sep 30 2015

Ford needs to repair a total of 381,633 vehicles in North America across six newly announced campaigns, including five safety recalls and one compliance recall. By far the largest of these campaigns covers the 342,271 examples of the 1998-2003 Windstar to double check an earlier recall repair. Among these, 283,413 are in the US and 58,858 are in Canada. The combination of corrosion and stress can cause cracks in the rear axle and eventually lead to the part to snap completely. The company reports a small number of accidents might be connected to this, but there are no injuries. The minivans were recalled for this issue back in 2010, and it was investigated by NHTSA. According to Ford's latest announcement, the reinforcement brackets on some of these models might not have been installed correctly. This time, dealers will perform an inspection. Minivans with incorrectly installed brackets will get a new rear axle. The rest of the owners will be offered a deal to replace the part at a reduced cost. The next largest campaign covers 36,857 examples of the 2015 F-150 to fix a problem with the adaptive cruise control. Specifically, there are 33,481 affected trucks in the US, and 3,376 in Canada. According to Ford, "when passing a large, highly reflective truck" the radar in the system can misidentify a semi as being in the same lane as the pickup. The collision warning system would then activate, slowing the F-150. There's one report of an accident with this happening but no injuries. The fix is simply an update to the adaptive cruise control module software. Ford also has a recall for 1,477 examples of its 2016 F-53 and F-59 stripped chassis models, and they're all located in the US. A manufacturing issue might allow the trucks to shift into reverse without the driver first applying the brakes. There are no reports of any accidents from this, though. To repair the problem, the models get a new transmission shift control bracket and an adjustment to the shift cable. The Blue Oval's safety compliance recall covers 708 examples of the 2016 Fusion and Lincoln MKZ, including 658 of them in the US, 28 in Canada, and 22 in Mexico. On these models, a manufacturing problem with the fuel tank could allow it to crack in a crash, which isn't allowed under federal rules. There are no reports of accidents, injuries or fires. The fix will be a new fuel tank for all of them. The company is also repairing 251 units of the 2015 Taurus and Lincoln MKS, plus the 2016 Explorer.

Ford Ka Concept shown in Brazil, could enter production by 2014

Wed, 13 Nov 2013

The Ford Ka (pronounce it like a Bostonian saying "car") is the Blue Oval's sub-Fiesta offering in a number of markets that aren't North America. It's been a staple in Europe since it launched in 1996 and in South America since 1997, where it's enjoyed quite a bit of popularity as an affordable, efficient city car.
The European and South American models grew apart over the years, until Europe ended up with a Fiesta-inspired car and Brazil retained a more evolved version of the original Ka's styling. With this Ka Concept, which is really a concept in name only, Ford is previewing a Ka not just for the European market, but as the brand's new, global small car. With city car sales expected to grow dramatically in coming years and the ever increasing price of fuel, Ford's move to get a new, competitive car into the market on a global level isn't surprising.
Wearing Ford's new, familial grille, the Ka Concept features the same crisp, sculpted sheetmetal that's adorned the Fusion and Fiesta. Developed in-house by Ford Brazil, a production version could launch by 2014, according to Ford's press release. It's unclear what engines will sit under this car's hood, although we'd bet the 1.0-liter, EcoBoost three-cylinder from the Fiesta will be available at some point.

Huge, pricey trucks haul jobs and profits for the Detroit Three

Tue, Feb 5 2019

DECATUR, Texas — Mickey McMaster is on his 12th pickup truck. The 61-year old farm equipment dealer in Decatur, Texas, two weeks ago treated himself to a 2019 GMC Denali for around $69,000 — a reward for long hours at work. "For me this is the Cadillac of trucks, it's a real luxury vehicle," McMaster said. "I've worked my way up to afford a truck like this and it shows that I've earned it." McMaster is the kind of customer General Motors Co is banking on as it plans to add 1,000 jobs at a plant in Flint, Michigan that will build a new generation of its largest pickups. Demand from Texas and other heartland states for big pick-ups is providing a lifeline to many workers the No. 1 U.S. automaker is laying off at plants elsewhere. The Detroit Three automakers and thousands of their U.S. workers are counting on customers like McMaster to keep buying bigger and more luxurious pickup trucks even if overall U.S. vehicle demand weakens this year, as most analysts predict. At Flint, GM will build a new generation of its heavy-duty Chevrolet Silverado and GMC Sierras, including luxury models that are some of the most profitable vehicles on the planet. GM, Ford Motor Co and Fiat Chrysler Automobiles NV's Ram division own the segment and are each doubling down with new or redesigned models launching this year. Sales of heavy-duty pickups in the United States have grown to more than 600,000 vehicles a year, up more than 20 percent since 2013, according to industry data. Prices for luxury models can easily top $70,000. GM on Tuesday celebrated the launch of a new generation of heavy-duty GMC and Chevrolet pickups at the assembly plant in Flint, Michigan, that is now building all such trucks for the company. At the same time that GM is laying off thousands of U.S. workers and planning to shutter five North American factories, Flint is hiring. The plant runs on three daily shifts, six days a week. As the new model's assembly system ramps up, the plant's capacity will increase by more than 25 percent, plant manager Mike Perez told Reuters. The Flint plant plans to add 1,000 workers, more than half of the 1,500 factory workers who have asked to transfer from plants GM has targeted for shutdown as part of CEO Mary Barra's restructuring plan. "We're bringing in 50 to 100 people every week," said Perez. Workers last week were still finishing the job of retooling the Flint factory to build the new heavy-duty trucks as part of a $1.5 billion investment project.