1987 Ford Bronco Ii Xlt *project Truck* on 2040-cars

Auto blog

Ford shows off V8-powered Ranger headed to Dakar Rally

Avert your eyes now if you're jealous that the global version of the Ford Ranger is not offered in the US. Ford's midsize pickup is being tuned up to take on the 2014 Dakar Rally, and the result is a truck that is probably even cooler than any F-150 SVT Raptor we've ever seen in the States. Ford is actually building two versions of the truck for Dakar, which will run from January 5 through January 18, covering more than 5,000 miles from Argentina to Chile.
Starting with a fully composite body and a 5.0-liter V8 plucked from a Mustang, nearly every aspect of the trucks have been purpose built to take on the grueling race. This includes things like the six-speed sequential gearbox, liquid-cooled rear brakes and the 132-gallon fuel tank. As proof that Dakar is more about endurance than speed, the engines used in these race trucks will be limited to around 350 horsepower and 413 pound-feet of torque, and will max out at a top speed of just 105 miles per hour. Scroll down for Ford's official press release offering more information about the trucks and teams being prepped for Dakar.

2020 Ford Escape, Lincoln Corsair ace crash tests, earn Top Safety Pick from IIHS

The redesigned 2020 Ford Escape and its platform-mate, the 2020 Lincoln Corsair, have both just completed their bout of crash tests at the hands of the Insurance Institute for Highway Safety, and while they did not emerge unscathed, they did come away with the agency's Top Safety Pick Award. One caveat: The rating only applies to the Escape equipped with the available LED headlights, which were deemed Acceptable. Similarly, the Corsair needs the available curve-adaptive LED headlights, also rated Acceptable, in order to achieve Top Safety Pick. The Escape's standard halogen headlights scored only a Marginal rating, while the Corsair's base LED headlights were deemed Poor due to glare. Those low headlight ratings knock the vehicles out of contention for Top Safety Pick. Had either vehicle offered headlights able to achieve a Good rating, that would have been enough to get them the agency's Top Safety Pick+ rating. Outside of their headlights, the 2020 Escape and Corsair acquitted themselves well. The Escape saw a big improvement in the difficult small-overlap front crash test, going from a Poor result in the previous generation to Good with the new one. The Corsair performed identically, and both achieved Good ratings in all six crash tests. The IIHS also tests automatic emergency-braking systems, and the standard and optional systems in the Escape and the Corsair both earned Superior ratings.

How Ford plans to handle insurance and repair questions surrounding new aluminum-bodied F-150

Building a car out of aluminum has a number of benefits - the lighter weight allows the vehicle to be more agile, more fuel efficient, make better use of its power and be more resistant to dings and dents. The downside to the advanced construction, though, is that repairs are both challenging and expensive. That's troubling for the new, aluminum-bodied Ford F-150, because it's kind of made a name for itself as a rugged, durable work vehicle.
How will the legions of Ford buyers cope when it comes time to insure and repair their new trucks? Well, according to Ford, it's expecting a ten-percent jump in insurance costs for the aluminum-bodied F-150, although Ford's truck marketing manager, Doug Scott, was quick to point out that the F-150 is generally cheaper to insure than its competition from Ram and General Motors. "At the end of the day, that's sort of a wash," Scott told Automotive News at last week's Detroit Auto Show. "We've spent a lot of time and feel very comfortable that that's not going to be an inhibitor."
The other issue facing Ford is the distinct lack of body shops that have the training or equipment to repair aluminum-bodied vehicles. AN cites an estimate from the Automotive Service Association claiming that of the 30,000 independent body shops in the US, less than 10 percent are able to work on aluminum.