71 Torino Gt on 2040-cars

Auto blog

Recharge Wrap-up: Atieva making EV with former Tesla talent, Holland lowers PHEV incentives

A reduction of tax incentives on company cars in Holland is expected to put the brakes on plug-in hybrid sales. Cars are taxed at an average of 25 percent, with plug-in hybrids taxed at just seven or 14 percent, depending on emissions. Taxes on PHEV company cars will increase to 14 and 21 percent. With company car leases making up a third of vehicle sales in 2014, the uptake on PHEVs "will likely go back to regular volumes," according to Volvo's Christiaan Krouwel. It could be a boon for battery electric cars, as their tax rate will remain at four percent for company cars. Read more at Automotive News Europe. Ford is testing cylinder deactivation in its 1.0-liter EcoBoost engine. On-road prototype testing has shown improvements in fuel economy of as much as six percent. Ford engineers developed a system using a new dual mass flywheel, pendulum absorber, and tuned clutch disc to allow cylinder deactivation under a wider range of speed and engine loads with less NVH. "The highest priority in the development of new combustion engines for automotive applications is the ongoing reduction of fuel consumption," says Ford's Andreas Schamel, presenting Ford's findings to the Vienna Motor Symposium. Read more at Green Car Congress or in the press release from Ford. Atieva is building an EV with the help of numerous former Tesla employees. The Silicon Valley-based startup was founded in 2007 by a former Tesla vice president, and its roster includes 12 other former Tesla employees. Already well funded, Atieva is now looking to fill its ranks with more talent, with 32 engineering positions, two recruiter positions and other job openings posted at its website. As for the EV it is working on, Atieva says it is "redefining what a car can be, by building an iconic new vehicle from the ground up." Read more at Charged EVs. Testing shows that Joule ethanol, made from recycled CO2, meets standards for use in the US and Europe. In partnership with Audi, Joule has been working toward making its recycled CO2 fuels ready for commercialization. "We are pleased to achieve another critical step towards our planned near-term delivery of fuel-grade ethanol from recycled CO2," says Joule President and CEO Serge Tchuruk. "Using waste CO2 as a feedstock, our technology has the two-fold advantage of reducing greenhouse gas emissions and producing cost-competitive, drop-in fuels." Joule will use these test results to get government approval for the use of its ethanol in highway fuel.

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford recalls 434k vehicles for several unrelated issues

It seems that the hard winter in much of the country has been as rough on some Fords as it has on many people. The Blue Oval is recalling roughly 434,000 vehicles in two separate recalls, and one of them partially caused by the salt used to melt the snow on roads.
The first recall covers 385,750 2001-2004 Escape models in the Midwest, Northeast and Canada because a subframe could rust and eventually fail. This is partially due to the road salt used in those areas, and about 349,000 of the affected vehicles are in the US. To remedy the problem, dealers are installing a reinforcement cross brace on the frame to strengthen them. There has been one crash caused by the failure but no injuries. According to The Detroit News, this is not the first rust-related recall for Ford. It estimates the company has repaired over two million vehicles since 2010 for problems on vehicles related to the iron oxide, including the rear wheel wells of the Freestar minivan.
The second recall covers 48,950 2013-2014 Ford Fusion, Escape, C-MAX and Lincoln MKZ models because welds in their seatbacks don't meet National Highway Traffic Safety Administration standards. The fault affects the front seats, and the sub-standard welds joining the setback to the recliner could increase the chance on injury. There have been no reported injuries or accidents caused by the problem, but there are 42,972 affected vehicles in the US and 4,744 in Canada.