03 Red Ford Thunderbird V8 5 Speed Auto W/ Select Shift on 2040-cars

Auto blog

Ford vandalizes the SEMA Show floor with 2014 Transit Connect

The Ford booth here at SEMA is practically a 1970s throwback with all these customized vans sitting front and center. And we're completely fine with that. Take the black and yellow (black and yellow, black and yellow) 2014 Transit Connect from Mobsteel above. It's got a great stance, sits on steel wheels and has a pretty cool paint job and graphics package to boot.
Of course, that's not the only van you can see at the Ford booth. In fact, there are 10 Transit Connect vans on display from Ford here at SEMA, and you can see them all in our live gallery of high-res images above. Then, if you want to know more about each specific model, feel free to scroll down to read all about these vans in the official press release from Ford.

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.